The Touch Screen; Idle Loop Screen - CPI Merchant Media 2 Combo Programming Manual

Adding Initial Change Load
1. Enter the required PIN: 3333,
2. Touch the Monetary menu bar on the screen.
3. Touch the Coins In/Out menu Bar
4. Increase the amount of Change Available by inserting coins to thru the chute on the top of the coin mech. Totals
(count and value) for each coin should increase as coins are added.
Press the left arrow to exit and return to the main menu.
3333

The Touch Screen

•
Offers the latest capacitive touch screen technology providing scratch resistance,
high durability and a rich consumer experience.
•
Is an industrial screen that can withstand medium hard hits w/ hammer similar to
gorilla glass used in mobile phones
•
Has full motion video Capability
•
Self-Calibrating
•
Provides instructions and information required by the customer to make a purchase.
•
Is utilized in the service mode to set up the machine.
Idle Loop Screens
When the machine is not being used, the Touch Screen is showing the Idle loop. The Idle Loop screens will vary depending
on what peripherals you have installed and the promotions that are enabled. To enable or disable specific Idle Screens
and credit card logos, see System Settings > Advertisements. Touching any of these screens will take you to the Main
Menu.
+
+
=
4