Security Codes; Firmware Information - CPI Merchant Media 2 Combo Programming Manual

Security Codes

This menu item will allow the operator/technician the ability to change the
PINs that to gain access to the Service menus. If the Pin is changed there is
no way to recover the pin in the case it is forgotten.
Enter PIN
This is the PIN that you use to access the other menus.
Change the Driver PIN
This will allow you to change the PIN that the Drivers use to access their
menu options.
Change the Operator PIN
This will allow you to change the PIN that the Operator/Technician uses to
access the menus
Change Engineering PIN
This will be used to change the PIN that the Manufacturing Engineers use
for their menus.
Change Manufacturing PIN
This will be used by Manufacturing to change their standard PIN.
Route Driver Price Menu
This menu option is used to allow price-changing capabilities within the
Driver menu.

Firmware Information

Touching Firmware on the keypad brings up an information screen that
displays the following information:
All the MDB peripherals in the machine including manufacturer, serial
number and software version.
The software version of the SureVend™ board.
The software version of the I/O board.
The software version of the Atlas (LE) board.
The serial number of the Atlas control board, along with the software
version, and kernel file version.
If Crane cashless is used it will also show the Processor, Customer
account number and code.
46