Telemetry - CPI Merchant Media 2 Combo Programming Manual

Telemetry

The Telemetry Menu is used to set up the Integrated Wireless Radio, Cashless,
Remote DEX Alerts, Mesh Network.
The Telemetry Menu also allows you to send a DEX file on demand in addition
to the scheduled times.
Driver Cards are available to send a DEX read when servicing the machine or
you can send a DEX from this menu or the Driver Menu (pin 1111) has a Send
DEX icon.
Get Network Status
Select this menu item to retrieve the current network status.
Ping Server
Select this menu item to Pin the Server, once selected it will display successful
or failed.
Assign Unit
Before assigning the unit, you must establish an account with the card
processor and Crane Streamware. All of the information and Applications are
included in the Welcome packet that came with the machine. If you have any
questions, contact your Crane Distributor or Sales Person.
When the customer account is established, Crane Streamware will email the
customer configuration (VIX) file to upload and assign the Merchant Media.
Insert the Flash Drive with the VixConfigData.cfg file into USB 3 on the control board, Select Assign Unit, the display will
show you the available Vix file (accounts information) on the flash drive and prompt you to choose that file or choose
another.
Load Network Config
Use this menu item to load the current network configuration from the server.
Show Network Configuation
Use this menu item to view the network configuration.
47