MTI FREEDOM CORE II Product Manual page 7

REMERCHANDISING THE SENSOR
1
Insert IntelliKey into Power Screamer port until LED
turns green.
3
Turning clockwise, twist off the Power Screamer from
the base plate.
5
Hold the Adhesive Pad Removal Tool with both hands
and using a sawing motion, pull one side of the tool,
then the other back and forth until the VHB is released
from the base plate. Remove excess VHB by rolling it
off the surface.
www.mobiletechinc.com | T:800.426.6844
-CONTROLLED DOCUMENT-
FREEDOM CORE II™ POWER/SCREAMER SENSOR
063-00229 A-0 Status: Approved
2
Using the Double-Sided System Tool, turn clockwise.
4
Remove the GeniusCable.
6
Clean the Power Screamer with an alcohol swab and
let air dry or wipe dry with a clean cloth. Replace VHB
with extra pads provided.
MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved
ECO-106737
7