Anchor Installation - MTI FREEDOM CORE II Product Manual

VHB ANCHOR INSTALLATION
Clean the fixture with an alcohol
1
swab and let air dry or wipe dry
with a clean cloth.
SCREW DOWN ANCHOR INSTALLATION
1
Using the Double-Sided System
Tool, remove the cover on the
Power/Screamer Anchor.
Double-Sided
System Tool
www.mobiletechinc.com | T:800.426.6844
-CONTROLLED DOCUMENT-
FREEDOM CORE II™ POWER/SCREAMER SENSOR
Peel the red film from the VHB
2
adhesive (pre-installed on the
Power/Screamer Anchor).
Plungers
2
Using a short length philips head
screwdriver, secure the anchor to
the desired location.
063-00229 A-0 Status: Approved
Place in desired location.
3
Ensure VHB is fully adhered
and plungers are fully depressed
or they may cause false alarm
condition.
3
Replace the cover on the Power/
Screamer Anchor using the
Double-Sided System Tool.
Short Length
Philips-Head
Screwdriver
MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved
ECO-106737
Double Sided
System Tool
3