Page 1: Table Of Contents
LED Troubleshooting 10. Limited Warranty DO NOT REMOVE FROM STORE For additional support, please reach out to our Contact Center at 800-426-6844 www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved ECO-106737...
Page 2: Materials In Box
Sensor Plate Power Supply REQUIRED BUT NOT INCLUDED Power Supply Cable Double-Sided System Tool GeniusCables Philips-Head Screwdriver Required for screw down installations. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved ECO-106737...
Page 3: Anchor Installation
Screamer Anchor using the Power/Screamer Anchor. the desired location. Double-Sided System Tool. Double-Sided Double Sided Short Length System Tool System Tool Philips-Head Screwdriver www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved ECO-106737...
Page 4: Merchandising
Use the individual power supply and plug it into the nearest outlet. The socket-outlet shall be installed near the equipment and shall be easily accessible. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved ECO-106737...
Page 5: Using Transfer Tape
Adhesive Transfer Tape with the plunger on the sensor. Peel the film from the Adhesive Transfer Tape. Place on the desired device. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved...
Page 6: Arming The System
Remove IntelliKey from Power/Screamer Sensor to arm the system. LED will turn solid white. LED is solid white upon removing key, indicating system has now armed. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved...
Page 7 VHB is released with extra pads provided. from the base plate. Remove excess VHB by rolling it off the surface. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved ECO-106737...
Page 8: Changing The Anchor
Clean the Power/Screamer Anchor with an alcohol swab and let air dry or wipe dry with a clean cloth. Replace VHB with extra pads provided. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved...
Page 9: Sensor Riser Installation
VHB is released from the base plate. Remove excess VHB by rolling it off the surface. www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229 Status: Approved...
Page 10: Led Troubleshooting
Lowering the brightness level (during open hours) on your devices by 15-20% If you experience any condition not listed above, please contact Customer Service at 1-800-426-6844, Opt. 1 www.mobiletechinc.com | T:800.426.6844 MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00229...
Page 11: Limited Warranty
(6) months after date of shipment. This warranty shall not apply if buyer fails to notify MTI of such defect within ten (10) days after discovery, or if battery has been subjected to misuse, negligence or accident.

MTI FREEDOM CORE II Product Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MTI FREEDOM CORE II

Summary of Contents for MTI FREEDOM CORE II

Table of Contents