Setting Delay Start - Fisher & Paykel DW60FC1 Service Manual

5.6 Setting Delay Start

This feature can delay the start of a wash programme by 1 to 12 hours.
1 Load the dishes, add detergent and close the door.
2 Press to turn the dishwasher on.
3 Check that the display shows the wash programme you require. If not, see instructions
for 'Changing the wash programme'.
4 C1/C2/C4 models: Press
C6 models: Press and hold
The delay start indicator
(hours).
5 Press
again for a second to increase the number of hours you wish to delay the
wash by (1hr - 12hr in hour steps).
Note:
Hold down to scroll more quickly to your desired delay time.
Scrolling past 12 hours will exit delay start.
6 Delay start is now set. The display will countdown in hours. The wash programme will
automatically start when the delay time is over.
To cancel Delay start, press
Press to exit delay start and cancel the delay time.
5 OPERATION
SETTING DELAY START
.
for a second.
will light up and the display will show the delay time
.
20
5