Reflex EB 30 Quick Manual

English
Reflex Desludging Vessel
10.12.2018 - Rev. C
1 Quick Guide Reflex Desludging Vessel
Only specialist personnel or specifically trained personnel may install and operate the equipment.
• Modifications of the equipment are not permitted.
– For example, welding at other points than the connection piece (in equipment with welded connection)
– For example, mechanical deformations
• All required inspections must be ordered by the operator pursuant to the provisions of the applicable industrial safety regulations.
Required inspections and tests are:
– Inspections and tests prior to commissioning
– Inspections and tests after significant modifications of the installation
– Recurring inspections
• The devices to be installed and operated must not exhibit any visible exterior damage at the pressure component.
• Ignoring this manual and the safety information in particular, may cause the destruction and defects of the equipment, endanger
persons and adversely affect the functioning. Any contravention voids the guarantee and liability.
• Local guidelines and laws must be adhered to.
2

Overview

Desludging vessel 30
• Useful for installation in fluid circuits, in the return for protection against deposits in heat generators.
• Reducing the flow rate and creation of still zones for the deposition of fine sludge and suspended solids.
Type Max. op.
temperature
[°C]
EB 30 110
EB 60 110
EB 80 110
EB 100 110
EB 180 110
EB 300 110
EB 400 110
EB 750 110
Desludging vessel 60-100
Max. op. Connection (DN)
pressure
A1
[bar]
10 R1¼
10 DN50/PN16
10 DN65/PN16
10 DN80/PN16
6 DN100/PN6
6 DN125/PN6
6 DN150/PN6
6 DN250/PN6
Reflex Desludging Vessel — 10.12.2018 - Rev. C
Ø D
[mm]
A2
R1 409
R1 409
R1 480
R1 480
R1 600
R1 600
R1 750
R1 750
Quick Guide Reflex Desludging Vessel
Desludging vessel 180-750
H h
[mm] [mm]
455 270
770 465
765 468
870 535
1110 726
1600 1141
1500 1027
2215 1677
English — 1
Weight
[kg]
8.7
18.3
23.8
30
64.5
103
139.5
229.2