Save Parameter Adjustment Data - Vega VEGABAR 87 Operating Instructions Manual

Menu item
Backlight
Diagnostics
Menu item
Device status
Peak value
Pointer function temp.
Simulation
Additional adjustments
Menu item
Date/Time
Reset
Copy instrument settings
Scaling
Special parameters
Info
Menu item
Device name
Instrument version
Factory calibration date
Sensor characteristics
On paper
In the display and adjust-
ment module
VEGABAR 87 • Modbus and Levelmaster protocol
6 Set up the sensor with the display and adjustment module
Default value
Switched on
Parameter
Pressure
Temperature
Parameter
Delivery status, basic settings
Read from sensor, write into sensor
Scaling size
Scaling format
Service-Login
Parameter
VEGABAR 87
Hardware and software version
Date
Order-specific characteristics
6.7

Save parameter adjustment data

We recommended writing down the adjustment data, e.g. in this op-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module,
the parameter adjustment data can be saved therein. The procedure
is described in menu item " Copy device settings".
Default value
-
Current pressure measured value
Actual measuring cell and electronic tem-
perature
Process pressure
Default value
Actual date/Actual time
Volume in l
0 % corresponds to 0 l
100 % corresponds to 100 l
No reset
37