How To Manually Set The Clock - Oregon Scientific BAR913HG User Manual

HOW TO MANUALLY SET THE CLOCK

Press MODE and hold for three seconds. The 12-hr value will flash.
Use the UP(+) or DOWN(-) buttons to make a selection between a
twenty-four hour display and a twelve hour display.
Press MODE again, the hour will flash. Use the UP(+) or DOWN
(-) button to enter the hours. Holding down either the up or down
position will increase or decrease the value rapidly.
Press MODE again, the minute will flash. Again, use the
UP(+) or DOWN(-) button to change the minutes.
Note: When changes are made to the this setting, the seconds will
start from zero.
Press MODE again, the calendar settings are displayed and the year
is flashing. Use the UP(+) or DOWN(-) button to change the year.
Press MODE again. The day (D) and month (M) symbols will flash.
The unit provides an option that allows either the day or the month
to be indicated first. Using the UP(+) or DOWN (-) button, select
whether the calendar reads as: Day/Month; or Month/Day.
Press MODE button and the month will flash. Enter the appropriate
month using the UP(+) or DOWN(-) button.
Press MODE button and the day settings will flash. Enter the
appropriate day using the UP(+) or DOWN(-) button.
Press MODE again and the language setting will flash. Use the
UP(+) or DOWN(-) button to select E for English, D for German, F for
French, I for Italian or S for Spanish.
Press MODE to complete and exit the setting.
The weekday can be expressed as an abbreviation in five different
languages. The languages and their selected abbreviations for each
day of the week are shown in the language chart below.
913hg-e.p65 6
German
HOW TO SET AND ACTIVATE
THE ALARM
To set the Alarm
AL AL AL AL /
Press [AL ] button to display the daily alarm time (the icon "AL"
will be displayed)
AL AL AL AL /
Press [AL ] and hold for three seconds, the value for the hour
will flash.
Press UP(+) or DOWN(-) buttons to make changes to the alarm
hour setting.
AL AL / AL AL
Press [AL ] and the minute will flash. Enter the value for
the minute by using UP(+) or DOWN(-) buttons.
AL AL / AL AL
Press [AL ] to exit.
The alarm is automatically activated. The ALARM ON icon [ ] is
visible and the alarm will active at the specified time.
To deactivate the daily alarm function, press the DOWN(-) button
when the alarm time is displayed. The ALARM ON icon will
disappear and [ -:-- ] will be displated.
To activate, press the UP (+) button to display the alarm time again.
6
07/12/2001, 3:06 PM