Advertisement
SAFETY NOTE
1. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by
children without supervision.
4. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
5. WARNING: the drive shall be disconnected from its
power source during cleaning, maintenance and when
replacing parts.
6. The instructions shall state that the A-weighted emis
sion sound pressure level of the drive is equal to or
less than 70 dB(A), e.g. by writing LpA ≤ 70 dB(A).
7. The mass and the dimension of the driven part shall be
compatible with the rated torque and rated operating
time.
8. The type of driven part the drive is intended for.
9. WARNING: Important safety instructions. It is important
for the safety of persons to follow these instructions.
Save these instructions.
10. Do not allow children to play with fixed controls. Keep
remote controls away from children.
11. Frequently examine the installation for imbalance and
signs of wear or damage to cables and springs. Do not
use if repair or adjustment is necessary.
12. Watch the moving shutter and keep people away until
the shutter is completely closed.
13. WARNING: Important safety instructions. Follow all
instructions, since incorrect installation can lead to
severe injury.
14. Before installing the drive, remove any unnecessary
cords and disable any equipment not needed for
powered operation.
DM45EAF/S
Instruction
A-01
Features
Built-in Receiver
Switch Direction
Precise Limit Setting
Stall Protection
Jog & Tilt
Program Button
Limit Fine Adjustment
Reset to Factory Mode
Motor Mode Switching
Signal Repeater Function
Fields of Application
The motor is suitable for motorization of zip screen.
Specifications
Working Temperature:
-10℃ ~ +65℃
Radio Frequency:
Rated Voltage: 230V/50Hz
Thermal Protection time: > 4 minutes
Following data for reference
Rated Torque
Rated Speed
Model
(N.m)
(rpm)
DM45EAF/S-10/15
10
15
DM45EAF/S-10/26
10
26
DM45EAF/S-20/15
20
15
DM45EAF/S-20/26
20
26
DM45EAF/S-30/15
30
15
DM45EAF/S-40/15
40
15
DM45EAF/S-50/12
50
12
* For reference only.
Attention
Never drop, knock, drill or submerge the motor. Keep the power cable in right position as following.
Important safety instructions to be read before installation.
Incorrect installation can lead to serious injury and will void manufacturer's liability and warranty.
-1-
Electronic Limit
Preferred Stop Position
Auto Limit Setting
Sensitive Stall Detection
433.92MHz
Rated Current
(A)
0.48
0.69
0.69
0.9
0.87
0.99
0.99
Advertisement
