Product Description - UP3D F20 User Manual

5) No objects can be placed on the top of F20, and no liquids are
allowed to enter the interior;
6) F20 works at a high temperature, so it needs good ventilation.
Do not use it in a humid environment to avoid abnormal accidents;
7) When using the F20, pay attention to the operating conditions,
and the faulty pop-up window needs to be resolved in time;
8) When cleaning and maintaining the F20, the power must be cut
off, and do not carry out with electricity;
If you lose the manual, you can contact technical support of UP3D
02
TECH to get it

Product Description

2.1 Components
F20 smart sintering furnace is a sintering equipment suitable for zirconia
restorations crystallization.
The temperature in the chamber can be heated up to 1600 degree, and it
is controlled intelligently by the corresponding control system and control
software during sintering, and the target and actual temperature in the furnace
can be displayed in real time.
The F20 smart sintering furnace includes
the following components:
- 1 sintering furnace body
- 1 hearth base and 1 hearth
- 3 sintering tray with cover
- 1 pack of sintering beads
- 1 sintering tweezers
- 1 power cord