Configuration Instructions - UP3D F20 User Manual

3.2 Configuration Instructions

1. Function configuration of F20 smart sintering furnace:
Sintering program: 20 programs can be freely set by the user
Number of
crucibles:
Furnace mode:
Heating method:
Maximum heating
temperature:
Temperature
measuring
element:
Heating element:
Four ultra-pure
Operation mode:
Short-time power
off but continuous
burning:
Hearth down
automatically
during cooling:
Screen saver
popup
Trouble popup
False triggering
recovery
18
Easy to search when sintering.
Three layers of sintering tray can be placed at the same time,
Lifting open type
Heating evenly on all sides
1600℃
Type B thermocouple
Four ultra-pure silicon molybdenum rods
7 inch true color touch screen
If the temperature drops less than 150 ° C during power off, the
sintering can be automatically continued when the power on.
After cooling down to 800 ℃ , the hearth automatically goes
down.
Increase the cooling rate and save the sintering time.
Large words on the screen saver displays the remaining time of
sintering, the real-time temperature of the furnace, and
automatically adjustment of the target temperature, which can
be observed at a distance.
When a fault occurs, a pop-up window can be displayed in time
to show the fault code, and the corresponding
problem of the fault code can be found on the screen warning
page, which is convenient for maintenance.
If any misoperation, sintering recovery can be carried out when
the temperature drops less than 150℃