No
Parts
3
Ass'y
Control Out
4
Heat Exchanger
4- 5
Procedure
1) To remove the Cover control box : Pull the
motor wire is allow
space as shown
on the right side and then remove the screw.
2) Detach several connectors from the Ass'y
Control Out.
3) Detach several connectors from the PCB of
Ass'y Control Out.
1) Release the refrigerant at
.
2) Loosen
ng screw on both sides.
3) Disassemble the pipes in both inlet and outlet
with welding torch.
4) Detach the Heat Exchanger.
Remark
Samsung Electronics