Titan TTI884COM Manual page 8

Safety information
EN
Safety warnings
6) Service
a)
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Drill / screwdriver safety warnings
Safety Instructions for all operations
1. Wear ear protectors when impact drilling. Exposure
to noise can cause hearing loss.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
3. Safety instructions when using long drill bits
a. Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal
injury.
b. Always start drilling at low speed and with the bit tip
in contact with the workpiece. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal
injury.
08
MNL_18V 2X 2AH Li-ION BRUSHED COMBI DRILL_V2_211220.indd 8
TTI884COM
12/20/21 11:39 AM