Related Manuals for Titan TTI885IPD
Summary of Contents for Titan TTI885IPD
- Page 1 TTI885IPD WARNING: Read the instructions before using the product! V11221 / BX220IM MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 1 2021/12/23 10:31 PM...
-
Page 2: Table Of Contents
Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Technical and legal information Your product Technical Before you start more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee... - Page 3 TTI885IPD Safety information Safety warnings General power tool safety warnings WARNING! Read safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 4 TTI885IPD Safety information Safety warnings b) Avoid body contact with earthed or grounded surfaces, pipes, radiators, ranges refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions.
- Page 5 TTI885IPD Safety information c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. switch or energising power tools that have the switch on invites accidents.
- Page 6 TTI885IPD Safety information Safety warnings c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Page 7 TTI885IPD Safety information 5) Battery tool use and care manufacturer. A charger that is suitable for one type with another battery pack. battery packs. Use of any other battery packs may c) When battery pack is not in use, keep it away from...
- Page 8 TTI885IPD Safety information Safety warnings 6) Service person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
- Page 9 TTI885IPD Safety information f) Do not charge battery in a damp or wet location. Following this rule will reduce the risk of electric shock. g) Do not disassemble the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted.
- Page 10 TTI885IPD Safety information Safety warnings the development of Asthma. The risk of lung disease is linked to people who regularly breathe construction dust over a period of time, not on the odd occasion. To protect the lung, the COSHH Regulations sets a limit...
- Page 11 TTI885IPD Safety information WARNING! Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
- Page 12 TTI885IPD Safety information Safety warnings the HSE website has further information. The declared vibration emission value has been measured in accordance with a standardised test and may be used to compare one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.
- Page 13 TTI885IPD Safety information WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
- Page 14 TTI885IPD Safety information Safety warnings c) Use correct attachments for the product and ensure they are in good condition. d) Keep tight grip on the handles/grip surface. e) Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
- Page 15 TTI885IPD Safety information Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product:...
- Page 16 TTI885IPD Safety information Symbols others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (direct current voltage) mAh Milliampere per hour /min or Per minute °C Degree Celsius Gram...
-
Page 17: Your Product
TTI885IPD Safety information / Your product Do note expose battery packs to heat in excess of 45 ºC. Do not charge or store the battery pack in temperatures below 0 °C (32 °F) and above max. 45°C 45 °C (113°F). - Page 18 TTI885IPD Your product 1. Tool holder 6. Handle b) Battery capacity 2. Sleeve 7. Belt clip button 3. Air vents 8. Work light c) Release button 4. Forward / reverse 9. Battery pack d) Battery docking rotation control a) Batery capacity port 5.
- Page 19 (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Rating label explanation TTI885IPD = Model number TT = TITAN I = 18V Lithium-Ion 885 = Serial Number...
-
Page 20: Before You Start
TTI885IPD Before you start Unpacking WARNING! The product and the packaging are not children’s toys! Children must not play with plastic bags, sheets and small parts! There is a danger of choking and suffocation! You will need (items not supplied) - Page 21 TTI885IPD Before you start Inserting / removing / replacing 1. Pull the sleeve (2) and insert a suitable bit holder all the way to the stop into the tool holder (1). Release the sleeve (2) to lock the bit holder in place (Fig.
- Page 22 TTI885IPD Before you start Charging Charging the battery pack The battery pack (9) for this product has been shipped in a low charge condition. Refer to the charger’s instruction manual for details. Battery capacity indicators The battery pack (9) is equipped with the battery capacity indicators (9a) which are used to give an indication of the battery pack’s remaining capacity.
-
Page 23: In More Detail
TTI885IPD more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Declaration of conformity MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 23 2021/12/23 10:31 PM... - Page 24 TTI885IPD Product functions Intended use This product is intended for tightening and loosening screws, bolts, nuts with respective driver/hex nut driver bits. It must not be used for drilling and should not be used for working on materials that are dangerous to health. It must not be used for tightening or loosening car wheel nuts.
- Page 25 TTI885IPD Product functions Position Rotational Application direction Remove screw Fig. 6 Lock the on/off switch and avoid accidental starting Fig. 7 NOTE: rotational direction, a locking sound may be heard. This is normal and does not represent a defect. Automatic work light The work light (9) automatically illuminates by pressing the on/off switch (Fig.
- Page 26 TTI885IPD Product functions Switching on/off Ensure the forward / reverse rotation control (4) is not on centre lock position. 1. Switch the product on by pressing the on/off switch (5) (Fig. 9). 2. Switch the product off by releasing the on/off switch (5) (Fig. 9).
- Page 27 TTI885IPD Product functions / Operation Fig. 10 Fig. 11 General operation 1. Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear.
- Page 28 TTI885IPD Care and maintenance The golden rules for care WARNING! Always switch the product off, remove the battery pack and let the product cool down before performing inspection, maintenance and cleaning work! 1. Keep the product clean. Remove debris from it after each use and before storage.
- Page 29 TTI885IPD Care and maintenance Repair This product does not contain any parts that can be repaired by the consumer. checked and repaired. Storage 1. Switch the product off and remove the battery pack. 2. Clean the product as described above.
-
Page 30: Troubleshooting
TTI885IPD Troubleshooting Troubleshooting Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed cannot solve the problem yourself! -
Page 31: Recycling And Disposal
TTI885IPD Recycling and disposal Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. The product comes in a package that protects it against damage during shipping. -
Page 32: Guarantee
We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN Cordless Impact Driver) has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost. -
Page 33: Declaration Of Conformity
TTI885IPD Declaration of conformity (UK) DECLARATION OF CONFORMITY Product • Cordless Impact Driver • TTI885IPD • Serial number: from 000001 to 999999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer. - Page 34 Product/ Produit/ Producto/Produto • Cordless Impact Driver/Visseuse à choc sans fil/Atornillador de impacto inalámbrico Berbequim de impacto sem fios • TTI885IPD • SN: 000001-999999 Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nombre y dirección del fabricante o de su representante autorizado:...
- Page 35 TTI885IPD Declaration of conformity 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2006/42/CE relative aux machines 2014/30 / UE telle que modifiée Directive Compatibilité électromagnétique Directive 2011/65/UE relative à...
- Page 36 Manufacturer,Fabricant,Producent,Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, London, W2 6PX United Kingdom www.kingfisher.com/products EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.kingfisher.com/products www.screwfix.com To view instruction manuals online, visit www.screwfix.ie www.kingfisher.com/products www.bricodepot.fr Pour consulter les manuels d’instructions en ligne, rendez-vous sur le site www.kingfisher.com/products www.bricodepot.es...