Related Manuals for Titan TTI886DRS
Summary of Contents for Titan TTI886DRS
- Page 1 TTI886DRS WARNING: Read the instructions before using the product! V11221 / BX220IM MNL_18V 2X 2AH Li-ION DRILL DRIVER_V2_211220.indd 1 12/20/21 11:43 AM...
-
Page 2: Table Of Contents
Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Technical and legal information Your product Technical Before you start more detail... Product functions Care and maintenance Troubleshooting Recycling and disposal Guarantee... - Page 3 TTI886DRS Safety information Safety warnings General power tool safety warnings WARNING! Read safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 4 TTI886DRS Safety information Safety warnings b) Avoid body contact with earthed or grounded surfaces, pipes, radiators, ranges refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions.
- Page 5 TTI886DRS Safety information c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. switch or energising power tools that have the switch on invites accidents.
- Page 6 TTI886DRS Safety information Safety warnings c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Page 7 TTI886DRS Safety information 5) Battery tool use and care manufacturer. A charger that is suitable for one type with another battery pack. battery packs. Use of any other battery packs may c) When battery pack is not in use, keep it away from...
- Page 8 TTI886DRS Safety information Safety warnings 6) Service person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
- Page 9 TTI886DRS Safety information Additional safety warnings for battery pack a) Battery pack needs to be charged before use. Always refer to the charger’s instruction and charge it properly. b) Remove the battery pack from the product when not in use.
- Page 10 TTI886DRS Safety information Safety warnings ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts. Construction workers are one of the at- risk groups within this because of the dust that they breathe: silica dust is not just a nuisance;...
- Page 11 TTI886DRS Safety information HOW TO REDUCE THE AMOUNT OF DUST? a) Reduce the amount of cutting by using the best sizes of building products. b) Use a less powerful tool e.g. a block cutter instead of angle grinder. c) Using a different method of work altogether – e.g.
- Page 12 TTI886DRS Safety information Safety warnings VIBRATION make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool. TECHNICAL SPECIFICATIONS INSTRUCTION MANUAL VIBRATION LEVELS OF YOUR TOOL.
- Page 13 TTI886DRS Safety information WARNING! actual use of the power tool can differ from the the tool is used: • How the materials are grinded, cut or drilled. • If the tool is in good condition and well maintained. • Use correct accessory for the tool and ensure it is sharp and in good condition.
- Page 14 TTI886DRS Safety information Safety warnings Health surveillance All employees should be part of an employer’s health and help employees stay in work. Vibration and noise reduction To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes as well as wear personal protective equipment.
- Page 15 TTI886DRS Safety information Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. a) Always be alert when using this product, so that you can recognise and handle risks early.
- Page 16 TTI886DRS Safety information Symbols reduce hazards like personal injuries and damage to property. Milliampere per hour /min or Per minute °C Degree Celsius Gram Kilogram Millimetre Metre Centimeter No-load speed dB(A) Decibel (A-rated) m/s² Lock / to tighten or secure.
-
Page 17: Your Product
TTI886DRS Safety information / Your product 5 - 45°C 45 °C (113°F). UK Conformity Assessed. Your product MNL_18V 2X 2AH Li-ION DRILL DRIVER_V2_211220.indd 17 12/20/21 11:43 AM... - Page 18 TTI886DRS Your product 1. Chuck jaws 10. Battery pack a) Sliding slots 2. Keyless chuck a) Battery docking b) Power cord with port plug b) Battery capacity indicators d) Charging status c) Battery capacity indicator (RED) rotation control button e) Power indicator 7.
- Page 19 TTI886DRS Usable battery pack (sold separately) > Model no. : TTI802BAT TTI803BAT > Capacity : 4000 mAh 5000 mAh Usable charger (sold separately) > Model no. : TTB805CHR > Rated output : 21.4V d.c., 4 A > Ambient temperature range for charger : 5 °C to 40 °C...
- Page 20 TTI886DRS Rating label explanation TTI886DRS = Model number TT = TITAN I = 18V Lithium-Ion 886 = Serial Number DRS = Cordless Drill Driver Unpacking contact your dealer. Using an incomplete or damaged product represents a hazard to people and property.
-
Page 21: Before You Start
TTI886DRS Before you start You will need (items not supplied) (items supplied) Suitable drill bits Battery pack (10) Charger (13) Bit holder Cooling lubricant (for drilling into metal) NOTE: Setup WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with... - Page 22 TTI886DRS Before you start Setup NOTE: Use a suitable bit holder to access areas that are hard to reach. Removing / Replacing Battery pack Attach / Release 2. Align the battery pack (10) with the sliding slots of the battery docking port (10a) and slide the battery pack in to attach it.
- Page 23 TTI886DRS Before you start Charging Charging the battery pack The battery pack (10) for this product has been shipped in a low charge condition. 1. Refer to the charger’s instruction manual for the details. Battery capacity indicators battery capacity button (10c) to check battery capacity (Fig. 6). The LEDs will stay...
-
Page 24: In More Detail
TTI886DRS more detail... Product functions Care and maintenance Troubleshooting Recycling and disposal Guarantee Declaration of conformity MNL_18V 2X 2AH Li-ION DRILL DRIVER_V2_211220.indd 24 12/20/21 11:43 AM... - Page 25 TTI886DRS Product functions Intended use This product is intended for drilling in wood and similar materials e.g. MDF, plywood etc., plastic, metal and impact drilling in brick, tile and concrete, as dangerous to health. trade use. It must not be used for any purposes other than those described.
- Page 26 TTI886DRS Product functions Function selection ring Drilling mode for drilling into wood, plastic and metal Forward / reverse rotation control WARNING! Only change the rotational direction when the product is switched off and has come to a complete stop! Always ensure that the...
- Page 27 TTI886DRS Product functions Position Rotational Application direction Loosen jammed drill Fig. 9 bits starting Fig. 10 NOTE: rotational direction, a locking sound may be heard. This is normal and does not represent a defect. Torque ring the desired number / symbol aligns with the arrow. Fig. 11 - 13...
- Page 28 TTI886DRS Product functions Torque ring Screwing larger diameter screws, screwing into hard materials Fig. 12 Clutch is locked Drilling operation into metal, wood, plastic Fig. 13 WARNING! Gearbox switch switch (4). WARNING! Only change the gears when the product is switched off switch as far as it will go.
- Page 29 TTI886DRS Product functions Position Speed / Torque Application Large diameter drill bits working on hard materials Fig. 14 Small diameter drill bits working on soft materials Fig. 15 NOTE: the drill chuck by hand until the gears engage. Automatic work light The work light (11) will automatically illuminate by pressing the on/off switch (7) (Fig.
- Page 30 TTI886DRS Product functions Switching on/off 2. Switch the product on by pressing the on/off switch (7) (Fig. 17). 3. Switch the product off by releasing the on/off switch (7) (Fig. 17). Fig. 17 Speed control Adjust the speed directly when operating with the built-in speed control. The on/ off switch (7) of this product is combined with a speed control.
- Page 31 TTI886DRS Product functions / Care and maintenance After use lit it cool down. 2. Check, clean and store the product as described below. The golden rules for care WARNING! let the product cool down before performing inspection, maintenance and cleaning work! Only perform care and maintenance work according to these instructions! storage.
- Page 32 TTI886DRS Care and maintenance Maintenance Before and after each use, check the product and accessories (or attachments) Repair This product does not contain any parts that can be repaired by the consumer. checked and repaired. Storage place. 4. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 °C and 30 °C.
-
Page 33: Troubleshooting
TTI886DRS Troubleshooting Troubleshooting Therefore check the product using this section. In most cases the problem can WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed Problem Possible cause Solution 1. Product does... -
Page 34: Recycling And Disposal
TTI886DRS Recycling and disposal Recycling and disposal Waste electrical products should not be disposed of with household For further information visit www.recycle-more.co.uk. Disposal of an exhausted battery pack pack properly. Consult your local waste authority for information regarding The product comes in a package that protects it against damage during shipping. -
Page 35: Guarantee
TTI886DRS Guarantee Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN Cordless Drill Driver) manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost. - Page 36 TTI886DRS Declaration of conformity (UK) DECLARATION OF CONFORMITY Product • Cordless Drill Driver • TTI886DRS • Serial number: from 000001 to 999999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer.
-
Page 37: Declaration Of Conformity
(PT) DECLARAÇÃO DE CONFORMIDADE UE Product/ Produit/ Producto/Produto • Cordless Drill Driver/Perceuse visseuse sans fil/Taladro atornillador inalámbrico/Berbequim sem fios • TTI886DRS • SN: 000001-999999 Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nombre y dirección del fabricante o de su representante autorizado:... - Page 38 TTI886DRS Declaration of conformity 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2006/42/CE relative aux machines 2014/30 / UE telle que modifiée Directive Compatibilité électromagnétique Directive 2011/65/UE relative à...
- Page 39 Manufacturer,Fabricant,Producent,Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, London, W2 6PX United Kingdom www.kingfisher.com/products EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.kingfisher.com/products www.screwfix.com To view instruction manuals online, visit www.screwfix.ie www.kingfisher.com/products www.bricodepot.fr Pour consulter les manuels d’instructions en ligne, rendez-vous sur le site www.kingfisher.com/products www.bricodepot.es...