Cm Rds; My Rds (Pty Search 1) - Teac MC-DX55 Owner's Manual

The Radio Data System (RDS) is a broadcasting service which
allows stations to send additional information along with the
regular radio programme signal.
1
Tune in an FM RDS station (see steps
18).
The Programme Service name (station's name) appears on the
display.
2 Press the RDS button.
Each time the RDS button is pressed, the RDS mode is
changed as follows:
PS (Programme Service name)
When you select PS, the frequency will be displayed for 3
seconds, and then PS (station's name) will be displayed. If
there is no PS data, "NO PS" will be displayed.
PTY (Programme Type)
When you select PTY, the programme type will be displayed.
If there is no PTY data, "NO PTY" will be displayed.
RT (Radio Text)
When you select RT, the news of stations composed of up
to 64 symbols will be displayed. If there is no RT data, "NO
RT" will be displayed.
RDS Clock Time (CT)
The clock setting will be automatically adjusted according
to the CT data.
If you tune in an RDS station broadcasting incorrect CT
data, the clock might be wrongly adjusted, and that may
eventually affect the timer operation.
No matter which RDS mode is selected, the unit receives
CT data and adjusts the clock.
To turn on or off the CT mode, press and hold the
RDS button for more than 3 seconds, then press
the skip button (
20
RDS
1 3
to
or ) to select on or off.
of page
A station can be searched by this function.
1 Select FM by pressing the FM/AM button.
2
Press the PTY button.
3
Within 10 seconds, select the desired PTY programme
using the SKIP buttons.
4 Press the PTY button.
Searching will start.
< When the programme that you have selected is found,
searching will stop and the programme type will be displayed.
< If the same program type is not found during PTY Search, it
will stop at the beginning frequency.
< If you want to stop searching, press the PTY button.
RDS (PTY Search 1)