Intex Krystal Clear Saltwater System CS7110 Instruction Manual page 11

SAVE THESE INSTRUCTIONS
Page 8
English
This product is specially designed for storable pools. It will destroy the bacteria,
oxidize bather organics and control algae, which provide a clean and comfortable
swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride.
During the installation of your Saltwater System, a measured quantity of salt is
dissolved in the pool water to make it slightly salty. The pool water flows through
the Saltwater System 's electrolytic cell to produce chlorine. The chlorine dissolves
in the water and instantly starts destroying bacteria and algae. It also oxidizes all
other organic materials.
Low voltage direct current is applied to the copper electrode, and copper ions are
generated and dissolved instantly in the water. Copper is an effective algaecide,
which helps prevent algae from growing in the pool.
Power:
Amperage:
Wattage:
Ideal Salt Level:
Maximum Chlorine Output/hour:
Copper Ionizer Output Current:
Minimum Flow Rate:
Limited Warranty:
Copper output of 0.14 ppm/day.
Maximum pool volume of 26 000 L.
Maximum output of hypochlorous acid equivalent to 0.125 kg of free available chlorine per day.
HOW THE CHLORINE IS GENERATED
HOW COPPER IONS ARE GENERATED
PRODUCT SPECIFICATIONS
110 ‐ 120 Volt AC
0.6A
65W
3000 ppm (parts per million)
5 grams/hour
175 mA
700 ~ 4000 gallons/hour (2650 ‐ 15140 liters/hour)
see "Limited Warranty"