Maintenance Chart - Man D2842 LE602 Operating Instructions Manual

ALWAYS COMPLY WITH SAFETY REGULATIONS
Check coolant level and oil level in engine
Check air filter contamination
Change engine oil (see also page 43)
Change oil filter cartridge (see also page 43)
Clean fuel strainer
Draining fuel filter / condensation (earlier if severe operating condi­
tions demand it)
Check and if necessary correct V-belt tension
1st retightening of cylinder head bolts (with overhauled engine)
Check that removable unions (bolts, hose clips, pipe fittings) are firmly
in position and, if necessary, retighten
Service the air cleaner (earlier if severe operating conditions demand
it)
2nd retightening of cylinder head bolts (with new or overhauled en­
gine)
Check and if necessary adjust valve clearance
Change disposable fuel filter / filter elements
Check turbocharger
Change coolant
Renew filler cap and working valve of cooling system
Check injection nozzles
* 1 - Daily
2 - After the first 10 to 20 hours of operation (with new or overhauled engine)
3 - Every 200 hours of operation
4 - After the first 400 hours of operation
5 - Every 400 hours of operation
6 - Every 1000 hours of operation
7 - Every 3000 hours of operation
8 - Every 2 years
9 - Every 6000 hours of operation
d Change interval in operating hours depends on quality of oil used, see page 43.

Maintenance chart

Maintenance jobs
1
D
D
42
Maintenance cycles *
2 3 4 5 6 7 8
D d d d
D d d d
D D
D
D D
D
D D
D
D
D D D
D
D
D
D
9
D