Introduction; Description - Honeywell 5000TC Series Operation And Maintenance Manual

1.1

Description

Mounting Styles
The Model 5000TC-series toroidal (electrodeless) conductivity sensor measures the conductivity of solutions from
0.2 to 2000 millisiemens/cm.
These sensors may be provided in one of two basic forms:
Convertible Style -- The convertible style sensor can be directly fastened to the end of a pipe for
immersion mounting or, by using the Honeywell union-mount adapter, it can be mounted into any standard
2-inch NPT fitting (tee, weldolet, pipe saddle, etc.). The convertible style sensor can also be insertion
mounted into a 2-inch ball valve assembly.
Sanitary Style -- This clean-in-place style sensor is constructed of 3A-approved materials. It has an integral
2-inch sanitary-mount flange which mates to Honeywell sanitary tee mounting hardware. The sanitary style
sensor includes a special cap and EPDM compound gasket. The gasket is also available separately for
mounting to a 2-inch sanitary clamp-type ferrule or butt-weld tee.
Mounting Types
The 5000TC sensors are available with a number of different mounting types. These include immersion
mounting (CPVC or PVDF materials, also PVC junction box), union adapter mounting (316 SS, CPVC, or
PVDF materials with optional 2" tee), sanitary mounting (316 SS 2" tee with heavy-duty clamp), or
insertion/removal mounting (316 SS or CPVC materials).
Wetted Materials
To simplify chemical resistance problems, these sensors are constructed so that only one material is wetted
by the process. The sanitary style sensor may be provided in polypropylene, PVDF or PFA Teflon material.
The convertible style sensor is also available in these same materials, and also in PEEK.
4/00 Series 5000TC Toroidal (electrodeless) Conductivity Sensors - Operation and Maintenance

1. Introduction

Introduction
1