GameSir G3 Gamepad Manual

Product Introduction

GameSir Game controller Standard Edition (G3) is connected by Bluetooth, it applies to Android devices (above 4.0 version). This Game controller can identify all the devices automatically, no need to root.

Product Specification

Product Overview

Product Function

Power On / Off

1. Power On: Press HOME button for 2 seconds to start.
2. Power Off: Press HOME button for 5 seconds to power off.

Low Battery Indication

HOME and ABXY lights flash once /second.

Charging Indication

1. Charge under connection state
   When connect the charging cable, the HOME and ABXY lights flash once / 2 seconds, and the lights keep on when it is fully charged.
2. Charge under sleeping state
   When connect the charging cable, the Game controller wakes up and enters current mode, no signal receiving after 1 minute, mode lights turn off. HOME and ABXY Button lights start flashing, and the lights keep on when it is fully charged.

Sleeping Function

1. The Game controller enters sleep state after 1-minute disconnection.
2. The Game controller enters sleep state after 5-minute no action.

Turn On/Off the button lights

Press L1 + R1 button for 5 seconds to turn on/ off the button light.

Game Controller Connection

Android Platform

1. Connection Method
   1. Open the Bluetooth on Android device.
   2. Press A + HOME button simultaneously for 2 seconds to start the Game controller.
   3. The indicator light flashes.
   4. One signal will be found on your screen"GameSir-G3".
   5. Choose and connect the right one" GameSir-G3"on the Bluetooth management interface.
   6. When indicator light keeps on and indicator light flashes, the Game controller is connected successfully.
2. Enter or Exit Mouse Simulation Mode
   Mouse Simulation Mode enables the Game controller to work as mouse. Left joystick simulates mouse move, A button simulates the left mouse click, B button simulates the right mouse click.
   1. Enter mouse mode: When Game controller is connected, press SELECT+ X button simultaneously to enter Mouse Simulation Mode, indicator light keeps on.
   2. Exit mouse mode: Press SELECT + X button simultaneously to exit the Mouse Simulation Mode, indicator light flashes.
3. Android mode only
   Press B + HOME button simultaneously for 2 seconds to start the Game controller. The difference of this start is the mouse light does not flash after connection, no Mouse Simulation Mode.

Auto Reconnection

When device Bluetooth is on and Game controller is off
Press HOME button for 2 seconds to start Game controller, the Game controller will be reconnected to the device automatically.

When device Bluetooth is off and Game controller is on
Turn on the Bluetooth on device, the Game controller will be reconnected automatically.

When device Bluetooth is off and Game controller is off
Turn on the Bluetooth on device, Press HOME button for 2 seconds to start the Game controller, the Game controller will be reconnected to the device automatically.

Notes:
If you want to connect Game controller with other device, please pair before using.

TURBO Function Introduction

TURBO is semi-automatic, it creates one or more continuous button press.

Setting Method

Press one or more buttons, (excluding D-pad, joysticks, SELECT, START button), and then press the " TURBO " button, to set TURBO function.

Clear TURBO

Press one or more buttons, and then click the " CLEAR " button to clear the TURBO.

Function

TURBO is used more in shooting games. Your fingers would easily get tired if you continuously press the same button (shooting button). With the TURBO, you can continuously shoot by holding the shooting button.

Package Content

1* GameSir Gamepad
1* USB Charging Cable
1* User Manual

Possible Problems

Why the Game controller does not work in games?

1. The game does not support Game controller
2. Set the Game controller mode into the game before using

Why the Game controller does not vibrate?

1. The game does not support vibration.
2. Vibration function is not open in game setting.

Others

1. When the Game controller can not be turned on, it may be because of running out of battery, please use USB cable to charge the Game controller.
2. When the Game controller was crashed or disconnected, please keep the device at effective distance, or reconnect.
3. Factory settings reset: There is a small hole at the back of Game controller, press the hole by using a needle to reset the factory settings.

www.GameSir.hk

Documents / Resources

References

• GameSir | The Global Leading Game Peripheral Brand – GameSir Official Store

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download GameSir G3 Gamepad Manual