Download The Mobile App - Davis Instruments Vantage VUE Sensor Suite Manual

Wall Mounting the Envoy
1. Use the provided wall mounting template as an example of hole spacing and
alignment when installing your Envoy.
2. Use the template as a guideline for the hole
markings on the wall where you want to mount
the Envoy, and use a pencil to mark the location
for the two mounting screws.
The screws should be 3.25
lined up vertically.
3. Drill the marked locations with a 3/32
(2.2 to 2.7 mm) drill bit.
4. Drive the two #6 x 1
head self-threading screws into the wall.
5. Leave at least a 1/8
wall and the heads of the screws.
6. Slide the keyholes on the back of the case over
the two screw heads.
Log On to WeatherLink.com and
3
Verify Data From the ISS
Once you have connected the WeatherLinkIP data logger to your router, the data logger
starts uploading your current weather data to your page on the WeatherLink Network. To
see your weather data over the Internet:
1. Go to www.weatherlink.com
2. Click Register, then click "Register with WeatherLinkIP."
3. Read the license agreement and register your account using the Device ID and Key
information provided on the data logger.
4. Create your account.
5. To view your current weather data on the web, click the My Weather tab at the top of
the page. Within a few minutes you should see your weather data online. (Anytime
you want to see your current data go to www.weatherlink.com/user/<username>.)
4

Download the Mobile App

Download the free WeatherLink Mobile App to see your station's data on
your smartphone. Search for WeatherLink on iTunes or the Google Play Store.
8
(82.5 mm) apart and
''
(3.5 mm x 25 mm) pan
''
(3 mm) space between the
''
or 7/64
'' ''
(82.55mm)
Drill 3/32"
or 7/64"
(~2.2 to 2.7mm)
Holes
3.25"