Cd Functions; Inserting A Cd; Removing The Cd; Starting Playback - Silvercrest KH 2328 Operating Instructions Manual

CD Functions

Inserting a CD

• Select the CD function with the function switch.
• Fold the carrying handle back.
• To open the CD compartment, press down the
flap at the position marked with
then release it.
The flap of the CD compartment opens upwards.
• Insert the CD, with the printed side upwards, in
the middle of the CD compartment. Thereby, en-
sure that the CD lies with its hole in the middle of
the cone of the turntable.
• To close the CD compartment, press down the
flap at the position marked
gages.
On the display after a short blinking of „--" the num-
ber of titles on the CD is shown.

Removing the CD

STOP
• Press the button
longer spinning.
The CD may no longer be spinning when
you open the CD compartment. It could be
irreparably damaged.
• To open the CD compartment, press the flap at
OPEN/CLOSE
.
• Remove the CD.

Starting playback

PLAY/PAUSE
• Press the button
In the display „PLAY" is shown and the first title is
played.

Stopping playback

STOP
• Press the button
OPEN/CLOSE
OPEN/CLOSE
until it en-
and wait until the CD is no
.
.

Interrupting/continuing playback

• During playback press the button
In the display the word „PLAY" flashes.
• To continue playback, press the button
SE
once more.

Next/previous title

and • To playback one of the forthcoming titles on a
CD, during playback press the button
atedly, until the number of the desired title appe-
ars in the display.
• To playback one of the previous titles, during
playback press the button
the number of the desired tile appears in the dis-
play.

Title fast forward/reverse

• During playback press the button
BACK
ton .
• Keep the button pressed until the desired point in
the title has been reached.

Repeat function (REPEAT)

With the repeat function you can repeatedly play-
back indivdual titles of a CD or all of them.
• To repeat individual titles, press the button
Blinking on the display is RPT.
• To repeat all titles on a CD, press the button
AT
twice.
Shown on the display is RPT .
• To finish the repetitions press the button
peatedly until the RPT extinguishes.

Programme playing order

You can programme in a playback sequence for up
to 20 titles, in which the individual titles of a CD are
played back. This is only possible when the play
function has been stopped.
• Press the button
The indicator
gramme position 1, the title which is to be played
first in the playback sequence.
• With the buttons
title for programme position 1.
- 26 -
BACK
repeatedly, until
PROGRAM
.
PRG01
blinks in the display for pro-
NEXT BACK
and select the desired
PLAY/PAUSE
.
PLAY/PAU-
NEXT
repe-
NEXT
or the but-
REPEAT
.
REPE-
REPEAT
re-