Jdaily Cleaning; Machine Cleaning; End Of Service - Electrolux EL1 Series User Manual

J DAILY CLEANING
WARNING
Refer to "Safety Information".
J.1

Machine cleaning

Cleaning must be carried out after every day of use. Use hot
water, a neutral detergent/cleaner if necessary, and a soft
brush or sponge. If another type of detergent is used, carefully
follow the producer's instructions and observe the safety rules
given in the information sheets provided with the product or
substance.
In order to reduce the environmental impact of pollutants it is
advisable to clean the machine (externally and, where
necessary, internally) with products that are more than 90%
biodegradable.
CAUTION
Do not use steel wool or similar material to
clean stainless steel surfaces. Do not use
detergents containing chlorine.
WARNING
When using chemicals, comply
with the safety notes and dosage
recommendations printed on the
packaging. Refer to the chapter
A.3 Personal protection equip-
ment for
products.
J.2

End of service

The appliance is designed to carry out an automatic cleaning
cycle to help flush out any residues and to guarantee greater
health and hygiene:
• Open the door and take out the rack containing the clean
dishes.
• Remove the flat filters "C".
C
handling chemical
30°C
86°F
C
• Remove the overflow "A" .
A
• Close the door. Select the drain cycle by pressing button
Drain/Self cleaning cycle.
• The message "CLE" will be displayed throughout the drain
cycle:
• After a few minutes, 3 beeps indicate the end of the
cleaning cycle and the message "END" blinks on the
display:
• Switch off the dishwasher by pressing ON/OFF button.
• Switch off at the mains.
• Close the water supply tap.
• Replace the filters and the overflow.
• Unscrew the ring nuts "H" and remove the header units "C".
M
F
O
• Release the arms "F", "I" and "O" from the hub, remove the
threaded plugs "L" and "Q".
• Carefully clean all the parts with a water jet and neutral
detergent/detersive, if necessary using a soft brush or
sponge. Do not use sharp implements to clean the nozzle
holes, which could otherwise be damaged.
• Only if the filters "M" are present in the appliance, remove
and clean them under a water spray.
H
Q
I
C
L
M
19