Nortek iQDrive C5B Installation Instructions Manual

Split system indoor coils

Advertisement

Quick Links

Split System Indoor Coils for
Installation Instructions
CAUTION:
Read the Installation Instructions
supplied with furnace/air handler and
observe all safety requirements out-
lined in instructions and/or furnace/air
handler markings before proceeding
with installation of the coil
Systems
These instructions are primarily intended to
assist qualifi ed individuals experienced in the
proper installation of this appliance. Qualifi ed
installer must have specifi c IQ Drive
training. Some local and national codes require
licensed installation/service personnel for this
type of equipment. Read all instructions carefully
before starting the installation.
TM
system

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iQDrive C5B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nortek iQDrive C5B

  • Page 1 Split System Indoor Coils for Systems Installation Instructions These instructions are primarily intended to CAUTION: assist qualifi ed individuals experienced in the proper installation of this appliance. Qualifi ed Read the Installation Instructions installer must have specifi c IQ Drive system supplied with furnace/air handler and training.
  • Page 3 Table of Contents 1. General Information ....................... 4 2. Coil Specifi cations ......................... 4 3. Coil Installation ........................4 • Upfl ow Furnace • Downfl ow Furnace • Horizontal Furnace • Horizontal Ready Coils for Horizontal Left Installation • Horizontal Ready Coils for Horizontal Right Installation 4.
  • Page 4: General Information

    1. GENERAL INFORMATION Make certain that the air delivery of the furnace/air handler is adequate to handle Standard cased coils are designed for upfl ow/ the static pressure drop of the coil, fi lter, and downfl ow applications or horizontal applications duct work.
  • Page 5: Coil Installation

    Slide the coil and drain pan assembly out 3. COIL INSTALLATION of the unit. IMPORTANT: Remove the plug from one of the threaded holes in the horizontal drain pan. WARNING: Completely remove the webbing located in the threaded holes of the drain pan. If webbing Electric furnaces may be connected to is not removed, the drain will not function more than one supply circuit.
  • Page 6: Refrigerant Line Connections

    The coil condensate pan is furnished with Note: All condensate pans have primary and 3/4" NPSC drain connections. Use a PVC secondary drain connections to meet FHA or similar material fi tting to attach the drain requirements. If the application is located in or above a living space where damage may line to the pan.
  • Page 7 1. The air fi lter installed with the system should be checked and cleaned or replaced twice per year. 2. Check the coil, drain pan, and condensate drain line for cleanliness at the start of each heating and cooling season. Clean as needed.
  • Page 8 INSTALLER: PLEASE LEAVE THESE INSTALLATION INSTRUCTIONS WITH THE HOMEOWNER Specifications & illustrations subject to change without notice or incurring obligations (05/15). O’Fallon, MO, © Nortek Global HVAC LLC 2015. All Rights Reserved. 7085540 (NEW)

This manual is also suitable for:

Iqdrive c5baIqdrive c5bh

Table of Contents