Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WM14VK00CS User Manual And Installation Instructions

Table of Contents

Advertisement

– If the water level is high, start
the odstřeďování programme
or select a suitable programme
for draining.
→ "Programmes", Page 24
Remove the laundry.
3.
→ "Unloading the laundry",
Page 31
13.9 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the odstřeďování programme
1.
or a programme for draining the
water.
→ "Programmes", Page 24
Press start/doplnění 
2.
13.10 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.11 Switching off the appli-
ance
Press
.
1.
.
a The display shows
a The controls are locked.
a The childproof lock remains active
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two dětský
zámek 3 s buttons for approx.
3 seconds.
even after the appliance has been
switched off and in the event of a
power failure.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two dětský
zámek 3 s buttons for approx.
3 seconds.
Childproof lock en
.
31

Advertisement

Table of Contents
loading

Table of Contents