Playing Discs; Dvd Setup Mode - jWIN JD-VD745 Operation Manual

O P E R A T I O N

PLAYING DISCS

1 . I f n e c e s s a r y , t u r n t h e u n i t O N w i t h t h e P o w e r S w i t c h . T h e u n i t ' s P o w e r L E D s h o u l d b e
GREEN, indicating that the battery is not in need of a charge. The unit will attempt to load
a disc if one is present under the disc cover. Press the PUSH TO OPEN button (item 15 on
page 6), on the left side of the front panel to open the DVD door and put a disc on the loader,
with the label side facing up. For double-sided DVD discs, mount the disc with the "A1"
label (the Side 1 equivalent label) facing up.
2. Close the DVD door, and the disc will be loaded automatically. Once loaded,
if it is a DVD disc, it will start playing automatically, typically showing either the
Menu/Title Page on the screen or previews of coming attractions.
if it is a CD, it will play the first track directly.
PRE-STOP []
3. Press the STOP button (item 17 on page 6 / item 22 on page 7) once if you want invoke the
PRE-STOP mode. PRE-STOP stops the playback, displa y s t h e ma n u f a c t u r e r ' s l o g o , a n d
allows playback to be resumed from the point at which STOP was pressed--simply by
pressing the PLAY/ENTER button (item 18 on page 6 / item 9 on page 7). PRE-STOP is
very similar to PAUSE, except that PAUSE freezes the existing video on the screen, while
PRE-STOP replaces it with the aforementioned logo.
4. Pressing the STOP button twice completely stops the disc, and causes the unit to enter
the STOP mode, where the disc ceases to spin, and playback can no longer be resumed
from the point at which the STOP button was pressed.
(PAUSE) STEP []
5. The PAUSE function is applicable to both DVDs and CD audio discs:
a. The PAUSE function (II) is initiated by pressing the PAUSE button (item 16 on
page 6 / item 23 on page 7).
b. For DVDs, pressing PAUSE causes the picture to freeze and the sound to
cease.
c. For CD audio discs, pressing PAUSE causes the sound to pause and be muted.
d. Press the PLAY/ENTER button again to resume normal play.
6. The STEP function (available only on the remote control (item 23 on page 7) is
activated only after PAUSE is invoked.
a. Each press of this key advances the video content by a small interval. The audio is
silent.
b. Cancel the PAUSE or STEP function by pressing PLAY.

DVD SETUP MODE

7. Setup Mode provides the menus for the configuration of the SYSTEM SETUP,
LANGUAGE SETUP, VIDEO SETUP, and SPEAKER SETUP categories.
a. Press the SETUP button (item 9 on page 6 / item 8 on page 7) to display the
Setup Menu.
b. Along the top of the initial display are four icons, each representing one of the four
categories listed above. By using the left [] or right [] direction keys (item 13 on
page 6 / item 10 on page 7), it is possible to highlight the desired category, whose
name will also be displayed in yellow type below the icons.
c. The following section will cover all four configuration categories and their
settings
9