Table of Contents FCC and Safety Information ... 4 Important Safety Instructions ... 5 Precautions ... 6 Selecting the type of disc for the type of TV connected ... 7 Chapter 1. DVD 1-1 DVD Playback ... 8 Basic Playback ... 8 Stopping Playback and Returning to The Menu Screen (If a Menu Is Available on The Disc) ...
Page 3
Table of Contents-continued Chapter 4. Setup 4-1 Language Setup ... 19 On Screen Display (OSD) Language Setting ... 19 DVD MENU Language Setting ... 20 AUDIO Soundtrack Language Selection [DVD] ... 21 SUBTITLE Language Selection [DVD] ... 22 4-2 Screen Setup ... 23 TV Type Setting ...
FCC and Safety Information CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Precautions Please read these precautions before operating this unit. Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. Hold the plug firmly when connecting or disconnecting the AC power cord. Keep the AC power cord away from heating appliances.
Selecting the type of disc for the type of TV connected DVDs are recorded in PAL or NTSC formats. Please refer to the table below to find the appropriate format for your region. Connecting to a multi-system TV Connecting to a NTSC TV Connecting to a PAL TV En 7...
The portable DVD player stops playback and displays the menu screen. After operation When the portable DVD player is not in use, remove the disc and press POWER to turn off the player. Close the display panel. << NOTE >>...
Press <PREVIOUS> during playback. When you press the button once midway through a chapter, the portable DVD player returns to the beginning of the chapter being played back. The player skips a chapter each time you press the button. Still Picture (PAUSE) Press <PAUSE>...
When you turn on or remove the disc, the portable DVD player will playback the language which is selected at the initial setting. If you select a language which is not recorded on the disc, the portable DVD player will playback a prior language programmed on the disc.
When you turn on or remove the disc, the portable DVD player will playback the subtitle language which is selected at the initial setting. If you select a subtitle language which is not recorded on the disc, the portable DVD player will playback a prior subtitle language programmed on the disc.
Mute the DVD Player Press <MUTE> button during playback. When “MUTE” appears on the screen, the portable DVD player is mute. To resume sound, press the button until “MUTE OFF” appears on the screen. Using DVD Menu Some DVD discs have unique menu structures. For example, DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus for audio and subtitle language.
Audio CD Playback Preparation Attach the battery or connect the portable DVD player to a wall outlet. If connecting to external equipment, please perform the following: Press on the power button of the TV set, and select “Video” as the TV input.
Skipping Back Press <PREVIOUS> during playback. When you press the button once midway through a track, the portable DVD player returns to the beginning of the track being played. The player skips a track each time the button is pressed. Pause Press <PAUSE>...
You can play Kodak picture CDs for viewing on the screen. Load a kodak picture CD. After few seconds, the portable DVD player starts to play back the pictures in slide show automatically. You can press the number buttons corresponding to the order of the picture, then press <PLAY/SEL.>.
Playing Kodak Picture CDs-continued Thumbnail Mode Press <TITLE> to enter Thumbnail mode. While in Thumbnail mode, there are 12 pictures per page for viewing. Press < > to select the picture in thumbnail. If you want to view the selected picture in its original size, press When you view the picture in its original size, you can press thumbnail.
You can play JPEG pictures CDs for viewing on the screen. Load a JPEG picture CD. After few seconds, the portable DVD player starts to play back the pictures in slide show automatically. You can press the number buttons corresponding to the order of the picture, then press SEL.>.
Playing JPEG picture CDs-continued Slide Show Press <NEXT> to view the next picture or Press <RIGHT> button or Press <RIGHT> button to rotate right by 90 degrees. Press <LEFT> button to rotate left by 90 degrees. To pause playback Press <PAUSE>.
Language Setup On Screen Display (OSD) Language Setting Allows you to set various languages for the on screen display (OSD). Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP> button / SEL.>. Press <UP> button / Press <PLAY/SEL.>.
Language Setup-continued DVD Menu Language Setting You can select a language that has been recorded on the disc menu. Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP> button / SEL.>. Press <UP> button / Press <PLAY/SEL.>.
<SETUP> to exit from SETUP MENU screen. For your reference: If the language selected is not recorded on the disc, the portable DVD player will play back the top-priority language of the disc. <DOWN> button to select “Language Setup”, and then press <DOWN>...
<SETUP> to exit from SETUP MENU screen. For your reference: If the language selected is not recorded on the disc, the portable DVD player will playback the top-priority language of the disc. <DOWN> button to select “Language Setup”, and then press <DOWN>...
Screen Setup TV Type Setting The kind of TV set (4:3 or 16:9) connected to the player and a wide-screen picture type for a 4:3 TV can be selected. Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP>...
Screen Setup-continued TV System Setting The player provides “PAL”, “NTSC” and “AUTO” settings for your selection. When connecting the portable DVD player to your TV, set the “TV System” from the on-screen display to the format that is compatible with your TV’s system.
Screen Setup-continued Video Output Setting Please choose the preferred video output according to the output format. Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>. Screen Setup To return to the SETUP MENU screen.
Page 26
If you choose “P-Scan” as the video output setting, make sure your TV set supports P-Scan input feature and the YUV cable be properly connected to your TV and the portable DVD player. If your TV doesn’t support P-Scan feature, press <<Troubleshooting>>...
Audio Setup Digital Out Setting The portable DVD player provides three options, “SPDIF/PCM”, “SPDIF/RAW” and “Off” for the digital out setting. Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>.
Audio Setup-continued Analog Out Setting Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP> button / <PLAY/SEL.>. Press <UP> button / Press <PLAY/SEL.>. Audio Setup To return to the SETUP MENU screen Press <LEFT> button. To finish the setup operation Press <SETUP>...
<< NOTE >> Whether the ANGLE MARK is set to “On” or “Off” with this setting, when you press button, the portable DVD player will still playback multi-angles that are available on the dvd discs. Custom Setup To return to the SETUP MENU screen Press <LEFT>...
Custom Setup-continued Default Setting You may re-set the previous settings in CUSTOM SETUP to the default setting. Press <SETUP> in the stop mode. Press <UP> button / <PLAY/SEL.>. Press <UP> button / SEL.>. Press <RIGHT> button to select “Read”, and then press <<...
LCD Setup Panel Setting The portable DVD player provides two panel adjustment options: “16:9” or “4:3”. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “PANEL”. Press <LEFT> button or then the panel will change to the selected setting.
LCD Setup-continued Bright Setting You can manually increase or decrease the brightness of the video. Press <LCD>, the LCD setting information shows on the screen. Press <LCD> a number of times to select “BRIGHT”. Press <LEFT> button or then the panel will change to the selected setting. BRIGHT: : : : : BRIGHT BRIGHT...
Troubleshooting Before requesting service for your portable DVD player, check the chart below for a possible cause of the problem you are experiencing. Some simple checkups or a minor adjustment on your part may eliminate the problem and restore proper operation.
Disc Handling and Maintenance Handling Precautions Hold the disc by the edges so the surface will not be soiled with fingerprints. (A) Fingerprints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids or any other solvent.
Definition of Terms Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.
Need help?
Do you have a question about the JD-VD765 and is the answer not in the manual?
Questions and answers