Registering Other Mobile Devices To The Window Camera - Panasonic HomeHawk KX-HNC500 User Manual

Using a shelf, floor, and window camera
2
Press the SETUP button on the camera for about 2 seconds.
R The camera's LED indicator starts blinking in green.
3
When prompted, create a login password for the camera, and then tap [Next].
4
When prompted, enter a name for the camera and mobile device, and then tap [OK].
R The camera name setting is used by your mobile device to identify the camera. This is useful when
you have multiple cameras.
R The mobile device name setting is used to identify your mobile device. This is useful when
performing certain operations, such as deregistering.
5
When [Congrats!] is displayed, tap [Explore HomeHawk].
R The app's home screen is displayed when initial setup is completed.
6
Reattach the cover.
WPS
1
Press and hold the WPS button on the wireless router until the router's WPS LED indicator starts
blinking.
2
Tap [Next].
3
Press the SETUP button on the camera for about 5 seconds.
R The camera's LED indicator starts blinking in yellow.
4
Tap [Next].
R When [Linking] is displayed, wait for up to about 2 minutes until the camera is connected to your
wireless network and mobile device.
5
Press the SETUP button on the camera for about 2 seconds.
R The camera's LED indicator starts blinking in green.
6
When prompted, create a login password for the camera, and then tap [Next].
7
When prompted, enter a name for the camera and mobile device, and then tap [OK].
R The camera name setting is used by your mobile device to identify the camera. This is useful when
you have multiple cameras.
R The mobile device name setting is used to identify your mobile device. This is useful when
performing certain operations, such as deregistering.
8
When [Congrats!] is displayed, tap [Explore HomeHawk].
R The app's home screen is displayed when initial setup is completed.
9
Reattach the cover.

Registering other mobile devices to the window camera

Confirm the following before you begin.
– Make sure you have installed the [HomeHawk] app on your mobile device
– Make sure your wireless router and the camera are turned on
– Make sure your mobile device is connected to your wireless router
– Make sure your mobile device can connect to the Internet
1
Start the [HomeHawk] app by tapping its icon (shown below).
R The end-user license agreement is displayed the first time you start the app.
R Confirm all of the displayed permission screens and agree as necessary.
R Select your country or region if displayed, and then tap [Next].
92