Checking The Selected Mode; Accessing The Mode Screen; Selecting Modes; Turning Modes Off - Panasonic HomeHawk KX-HNC500 User Manual

Checking the selected mode

The name of the selected mode is displayed below the name of the camera in the home screen ( "Shelf
camera, floor camera, and window camera home screen", Page 23).

Accessing the mode screen

The mode screen can be accessed by tapping the mode icon displayed below the name of the camera in
the home screen ( "Shelf camera, floor camera, and window camera home screen", Page 23).

Selecting modes

1
Access the mode screen ( "Accessing the mode screen", Page 107).
2
Select the desired mode.

Turning modes off

If you don't want the camera to operate by a mode, you can turn off modes by selecting [Basic].
1
Access the mode screen ( "Accessing the mode screen", Page 107).
2
Tap [Basic].

Creating new modes

You can create new modes to operate your devices when an event occurs such as motion is detected.
1
Access the mode screen ( "Accessing the mode screen", Page 107).
2
Tap .
3
Change the settings as required.
R Each setting is explained in this section.
4
When finished, tap [Create].
Mode name
When creating a new mode, you can set the name used for the mode. This helps you to identify the
mode from other modes used on your mobile device.
– To enter a name: Tap the text field and enter the text.
During this mode
You can choose the actions that will take place while the mode is selected.
– [24/7 Recording]: Enables 24/7 recording while the mode is selected.
Once motion is detected
You can choose the actions that will take place when the camera detects motion.
– [Start Recording]: Enables recording when motion is detected.
R [Duration]: Specifies the recording duration when motion is detected.
Using a shelf, floor, and window camera
107