Table of Contents
Advertisement
Installation Instructions
How to Connect and Install the Unit
Be absolutely sure to read through the "Read this first!" and "Installation precautions".
1) Connect and install in the following order:
2) Checking the installation location
3) Preparing the power source
4) Ceiling-suspended Installation/Standing Installation/Mount to a Tripod
5) Connecting the cables
Checking the Installation Location
Refer to the illustration, and determine where the unit is to be installed and in which direction it should
be mounted with due consideration for the unit and the wiring space on the back.
Ensure that there is at least 200 mm (7-7/8) of space for wiring behind the rear cover. Unit: mm
(inch)
2*
1/4"-20
UNC
Depth
6mm
φ4.2
165.1
82.6
13
118.7
163.1
176.1
Advertisement
Table of Contents
