Table of Contents
Advertisement
3.4 Using KTSync Keyboard – iOS
Once your KDC is connected to KTSync, you can use your KDC as a keyboard.
a) Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard...
> Select the KTSync keyboard to be added. (Fig. 6)
b) Select the KTSync Keyboard and toggle the switch to Allow Full Access. (Fig. 7)
c) Open the application you want to scan into and tap on the screen, so the on-screen keyboard appears.
d) Press and hold the globe icon located to the left of the spacebar.
e) Select the KTSync Keyboard and begin scanning. (Fig. 8)
Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work.
See Reference Manual for more detailed information.
Visit
store.koamtac.com
< Fig. 6 >
to purchase additional products and accessories.
KDC480 & KDC485
Quick Guide
< Fig. 7 >
< Fig. 8 >
QG_KDC480/485_20220317 p8
Advertisement
Table of Contents
