ActionTec ScreenBeam Pro SBWD100B User Manual page 34

What wireless signal range can I expect with the Receiver?
The Receiver is designed to be used in the same room with the source
device. For best performance, the source device should be placed within
30 feet to the Receiver.
Do I need an existing wireless network to use the Receiver?
No. The Receiver connects directly with the Intel WiDi or Miracast™-
enabled device, and no wireless network is needed. However, the source
device needs to be connected to an Internet router or data network to
view online content.
How can I upgrade the Receiver's firmware?
You can upgrade the Receiver's firmware wirelessly by using ScreenBeam
Configuration Utility, which is available on Actiontec's website:
http://www.actiontec.com/sbupdate.
Windows 8.1 devices, you can also install ScreenBeam Configuration
•
Utility (Metro) available on Microsoft Store (search for
"ScreenBeam").
For Android devices, you can also install ScreenBeam Configuration
•
Utility (Android) available on Google Play Store (search for
"ScreenBeam").
How do I configure the Receiver's general settings, such as
changing language, renaming the Receiver, enabling/disabling
the screensaver, and setting the idle time for the screensaver?
You can configure the Receiver wirelessly by using ScreenBeam
Configuration Utility, which is available on Actiontec's website:
http://www.actiontec.com/sbupdate.
For Windows 8.1 devices, you can also install ScreenBeam
•
Configuration Utility (Metro) available on Microsoft Store (tip:
search for "ScreenBeam").
ScreenBeam Pro Receiver
34