Frequently Asked Questions
Can my device connect to the Receiver?
To connect to the Receiver, your device must be Intel WiDi compatible or
Wi-Fi Miracast-capable.
For a system to support Intel WiDi 3.5 (or later), it should have most, if
not all, of the required Intel chipsets (processor, graphic card, and
wireless chipset). The following are some guidelines on the types of
computer system that can support Intel WiDi:
If your system is an Ultrabook (4th Gen Intel Core processor), it most
•
likely supports and has Intel WiDi 4.x preinstalled.
If your system is an Ultrabook (3rd Gen Intel Core processor or
•
older), it should have the required chipsets to support Intel WiDi.
Update your drivers and download the Intel WiDi software at: http://
www.intel.com/go/wirelessdisplayupdate
If your system is a laptop or a notebook, it may support Intel WiDi if
•
it meets the following processor, graphics, and wireless chipset
requirements:
Processor
One of the following processors is required:
2nd generation Intel Core i3/i5/i7 Mobile Processor
!
3rd Generation Intel Core i3/i5/i7 Mobile and Desktop
!
Processor
4th Generation Intel Core i3/i5/i7 Mobile and Desktop
!
Processor
Intel Pentium N3510 Processor
!
Intel Celeron N2805 Processor
!
Intel Celeron N2810 Processor
!
Intel Celeron N2910 Processor
!
Intel Atom Z3740 Processor
!
ScreenBeam Pro Receiver
30