Download Print this page
IPC Eagle Planet Optimum Series Operation And Parts Manual

IPC Eagle Planet Optimum Series Operation And Parts Manual

Industrial vacuums

Advertisement

Quick Links

Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Planet Optimum Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IPC Eagle Planet Optimum Series

  • Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
  • Page 2 Industrial Vacuums Planet Optimum Series Operations and parts manual...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. This machine is for commercial use. WARNING DANGER: Failure to read and observe all DANGER statements could result in severe bodily injury or death.
  • Page 4 Warning: Operating a machine without observing all labels, decals, etc., could result in injury or damage. Read all machine labels before attempting to operate the machine. Make sure all of the labels are attached or fastened to the machine. Get replacement labels and decals from the manufacturer’s distributor.
  • Page 5 120 Volt Machine Instructions For Connection To The Power Supply And The Electrical Ground This machine must be connected to the electrical ground to protect the operator from electrical shock. The machine has an approved power cord with three conductors and a plug with three terminals.
  • Page 6: Important Instructions

    IMPORTANT INSTRUCTIONS Before use the equipment must be correctly assembled with all of its components  Check that the electrical outlet is correct for use with the plug on the machine  Before connecting, check that the specified motor voltage corresponds to the main ...
  • Page 7: Periodic Maintenance

    Periodic Maintenance (Every six to twelve months) 1. Check filter for wear, replace dirt saturated filters that do not respond to normal cleaning. 2. Inspect gasket seals and replace those which have begun to leak. 3. Examine carbon motor brushes and commutator. Servicing The Filter The filter is accessed by lifting the head assembly off the tank.
  • Page 8 Servicing The Vac Motor Carbon Brush Replacement 1. Disconnect power cord from power source. 2. To access the vac motor, remove the screws that attach the main cover to the head assembly and set the cover to one side. 3. Remove the motor cover by removing two screws.
  • Page 9 Continuous Duty 220 Volt Head Pages 9-12...
  • Page 10 Continuous Duty 220 Volt Vacuum Head...
  • Page 11 Continuous Duty 220 Volt Cleaning Valve Item Part Number Description S8150100 Box Weldment S81T0000 Electrical Board S8070200 Tube S8070300 Sensor S8150500 Cover S8150600 Support Box S82T3700 Gasket S8150800 Support Weldment S8011400 Seal S8151000 Ring Weldment S8111300 Gasket S8191200 Rod, filter support S8151300 Spring S8013400...
  • Page 12 Continuous Duty 220 Volt Cleaning Valve...
  • Page 13 Continuous Duty 220 Volt Vacuum Head Item Part Number Description S8210107 Valve Body S8210200 Ring Valve S8011400 Ring Valve S8210403 Air Diverter Box S8210500 Hexagonal Bolt S8210600 Wash S8210700 Gasket S8210800 Ring Compensation S8210900 Intake Manifold S8211000 Piston, Nylon S8211100 Spring S8211200 Washer, aluminum...
  • Page 14 110 Volt Vacuum Head...
  • Page 15 110 Volt Vacuum Head Diagram 2 Item Part Number Description S82010330 3 Hole Valve Body, Upper S82020000 Ring Valve S82030030 Air Diverter Box S82040030 Hexagonal Bolt S82050009 Gasket S82060000 Compensation Ring S82070000 Nylon Piston S82080000 Aluminum Piston Washer S82090000 Snap Ring S82100000 Block Piston S82110009...
  • Page 16 110 Volt Vacuum Head...
  • Page 17 Diagram 4 110 Volt Vacuum Head Item Part Number Description S8401000W S84020000 Washer S84030000 Conical Spring S82170000 Knob S84050000 Block System S84060000 Guide S84070000 Exhaust Valve Adjustment Knob S84080045 Washer S84090009 Washer S84100000 Gasket S83211T002 Collector, Filter S82210009 Guide S84130370 Filter Support Rod S84140000 Spring...
  • Page 18 110 Volt Vacuum Head...
  • Page 19 110 Volt Vacuum Head Diagram 36 Item Part Number Description S836010000 Cover, Top S836020000 Air Separator S836031000 Cover, 3 motor S836041000 Motor Support, 3 motor S836050000 Gasket S81119S Motor 800 watt 110V S83891S Motor 1000 watt 220V S836070000 Valve S836080000 Gasket, Motor S836091000 Conveyor, 3 motor...
  • Page 20 110 Volt Vacuum Head and Single Stacked Tanks Frame...
  • Page 21 110 Volt Vacuum Head and Single Stacked Tanks Frame Diagram 32 Item Part Number Description S832010000 Internal Column S832020000 Guide Track S832030000 S832040000 S832053580 Cyclone Shield S832060000 Filter Seal S820826 Filter, Main S832080000 Tool Bin, Left Side S832081000 Tool Bin, Right Side S802210040 Guide S832100000...
  • Page 22 Single Stacked Tanks Parts not shown 23 Cast hose connector—machine port to 2” hose cuff 24 Hose Inlet Plug...
  • Page 23 Single Stacked Tanks Diagram 37 Item Part Number Description S837010000 Tank Coupling S837020009 Nylon Washer S837030000 Spacer Sleeve S837040000 Bin Release Handle S837050000 Bearing S837060000 Bushing S831040000 Wheel Cover S831030000 Cap Locknut S831050000 Swivel Caster S8371070X0 Collection Bin S837110009 Washer S837121000 Cart S832150150...
  • Page 24 Tandem Tank Assembly...
  • Page 25 Tandem Tank Assembly Item: Part#: Description: Qty: Item: Part#: Description: Qty: S820707G Tank, Vacuum Chamber S82726 Screw M6x12 S86907 Support Plate S86792 Bracket, Tank Support S87095 Latch, Tank S80130 Cap Nut M8 S81052 Washer, M6 S81034 Flat Washer M8 S82726 Screw, M6x12 S81744 Bushing 8x32 S86792...
  • Page 26 Tandem Cart Assembly Item: Part#: Description: Qty: Item: Part#: Description: Qty: S87294 Tube Cap S87227 Screw M8x45 S86823 Spring, Carriage S81034 Flat Washer M8 S86793 Guide, Shaft Hook S86791 Linkage Rod S87201 Shaft, Tank Support S86786 Shaft Stop S82052 Lock Nut M12 S86787/RIC Lever Link Rod S82054...
  • Page 27: Filter Assembly

    Filter Assembly Item: Part#: Description: Qty: S81650 Locknut M6 S87518/64 Plate S87518 Plate S87561 Gasket S86799 Filter Ring S87535 Basket, Filter S87023 Cloth, Filter S82082 Screw M6x20...
  • Page 28: Warranty Policy

    IPC Eagle will furnish and charge for replacement parts, including transportation, to the original owner through an IPC Eagle authorized service center. If the part is returned within 30 days and is found defective, the owner will be credited for the cost of the replacement part including shipping and handling.
  • Page 29 2955 Lone Oak Drive, #180 Eagan, MN 55121 Toll Free: 800-486-2775 www.ipceagle.com...