Advertisement
• Is there a setting error? Re-check the Synchronization Options and the
Communication Options settings.
• Check the amount of available memory on the Zaurus. If there is insufficient memory,
synchronization will not be performed correctly.
• Was the Zaurus operated during synchronization? Do not operate the Zaurus during
synchronization.
• Some of the data fields did not synchronize correctly.
(Intellisync for Zaurus, Qtopia Desktop for Zaurus)
• There are some synchronization limitations in these applications. See the Intellisync
for Zaurus operation manual and the Qtopia Desktop for Zaurus operation manual.
• Pressing the SYNC button on the Docking Station will not start
synchronization process. (Intellisync for Zaurus, Qtopia Desktop for
Zaurus)
• Make sure that "Sync Auto Start" on the "Sync" menu is selected. (See the Qtopia
Desktop for Zaurus operation manual: "About the Docking Station SYNC button" in
"BEFORE YOU BEGIN".)
• Make sure the Zaurus Manager icon is displayed on the Windows system tray of the
PC. (See the Qtopia Desktop for Zaurus operation manual: "Docking Station SYNC
button" in "BEFORE YOU BEGIN".)
• If you have both Intellisync and Qtopia Desktop installed, the default setting for the
SYNC button is for Intellisync. To have Qtopia Desktop synchronize using the SYNC
button, you must change the Communication Options setting in Intellisync and "Sync
Auto Start" setting in Qtopia Desktop. (See the Intellisync for Zaurus Operation Manual
and the Qtopia Desktop for Zaurus operation manual: "About the Docking Station
SYNC button" section under "BEFORE YOU BEGIN".)
• Check the instructions under "The Zaurus is not communicating properly with my
PC." and "Synchronization is not possible." in this guide.
• Synchronization is taking a long time.
(Intellisync for Zaurus, Qtopia Desktop for Zaurus)
• If you have an anti virus software program running on the PC, this may cause the
synchronization to take a long time. Close the anti virus software or temporally disable
its function.
• Close other resident software temporally. To close, right-click on an icon to click the
"Close", etc. from the menu.
12
Advertisement
