Teac DV-C200 Owner's Manual page 8

4.
Put the supplied batteries in the remote control unit.
5.
Connect the AC power cord to a wall outlet.
6.
Switch on power to the DV-C200, as well as the TV set.
7.
If the TV set is in TV mode, switch it to the Video mode.
You may have to select "external" or "video", depending on your
television. Set the TV to select the input source that you connected
the video cable to in step 3 above. (If you have difficulty finding the
proper selection, consult the owners manual for your television.)
VIDEO
8
"Fast Start" to Play a DVD 2
8. Switch the DV-C200 into the DVD mode by pressing the DVD
9. If the TV screen is rolling or scrambled, correct it by pressing
TV
10. Perform the following on-screen setting procedure.
Have the TV on.
button.
the remote NTSC/PAL button.
1) Get to the SETUP MENU by pressing the SETUP button.
GENERAL SETUP
2) To change the OSD (On-Screen Display) language, select
GENERAL SETUP from the menu.
NTSC
TEAC DVD PLAYER
SETUP MENU - - MAIN PAGE
GENERAL SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP