Advertisement
Case Front Control Standard
1.
Thermal LED: A yellow light that comes on when
an over temperature situation occurs. Output is
disabled until the machine cools down. When cool,
the light goes out and output is enabled.
2.
Amperage LCD Display
3.
Voltage LCD Display
4.
VRD LED indicators
5.
Crosslink communication indicator – When
green the power source is connected to a feeder via
crosslink.
6.
Hot Start Control Dial – Full range selection of hot
start from 0 to 10.
7.
Arc Force Control Dial: Full range selection of arc
force from -10 to +10.
8.
Local/Remote Selector Toggle Switch: Choose
machine output to be controlled locally through the
output control knob or remotely via a remote device
connected to the 12-pin connector(i.e. hand amptrol
or K870 foot amptrol), 14-pin feeder connector, or
through CrossLinc Technology.
9.
Output Control Dial: Sets the Output Current or
Voltage for the selected Weld Process.
10. Weld Process Selector Switch: A rotary switch
that toggles through the 5 available weld modes for
the Flextec 350x CE – CC-SMAW; CC-GTAW; CV;
CV-Innershield; ArcLink.
11. 5-pin ArcLink wire feeder circular connector.
12. 12-pin remote circular connector for attaching
optional remote control devices.
13. 14-pin wire feeder circular connector for attaching
wire feeder control cables.
14. Weld Terminals On/Remote selector switch sets
output ON all the time or remotely controoled by a
wire feeder or remote device.
15. Wire Feeder Voltmeter polarity selection switch
matches the polarity of the wire feeder voltmeter to
the polarity of the electrode.
16. Power Switch: Controls input power to the Flextec
350x CE.
17. Positive and negative welding output
connections.
English
Case Front Control Construction
1.
Thermal LED: A yellow light that comes on when
an over temperature situation occurs. Output is
disabled until the machine cools down. When cool,
the light goes out and output is enabled.
2.
Amperage LCD Display
3.
Voltage LCD Display
4.
VRD LED indicators
5.
Crosslink communication indicator – When
green the power source is connected to a feeder via
crosslink.
6.
Hot Start Control Dial – Full range selection of hot
start from 0 to 10.
7.
Arc Force Control Dial: Full range selection of arc
force from -10 to +10.
8.
Local/Remote Selector Toggle Switch: Choose
machine output to be controlled locally through the
output control knob or remotely via a remote device
connected to the 12-pin connector(i.e. hand amptrol
or K870 foot amptrol), 14-pin feeder connector, or
through CrossLinc Technology.
9.
Output Control Dial: Sets the Output Current or
Voltage for the selected Weld Process.
10. Weld Process Selector Switch: A rotary switch
that toggles through the 5 available weld modes for
the Flextec 350x CE – CC-SMAW; CC-GTAW; CV;
CV-Innershield; ArcLink.
11. 12-pin wire feeder circular connector for attaching
optional remote control devices.
12. Power Switch: Controls input power to the Flextec
350x CE.
13. Positive and negative welding output
connections.
6
English
Advertisement
