Charging your headset from your deskstand:
What you see
light off
1st . light solid
1 light solid, 2nd . light pulsing
2 lights solid, 3rd . light pulsing
3 lights solid, 4th . light pulsing
4 lights solid, 5th . light pulsing
All lights solid
Check Battery status:
• When you are not in a call, tap either volume button.The LED
will flash in accordance with the AC adapter/USB charger
sequence above .
turninG your headset on and off
• Gently turn the earpiece 90° clockwise to turn on the headset
(see fig. 1).
• Gently turn the earpiece 90° counter-clockwise to turn off the
headset (see fig. 1).
PairinG it With your Phone
The first time you turn on your Jabra JX20 PURA it will automatically
enter pairing mode . In this case skip directly to point 2 below .
When pairing with a second device, or if you need to pair
manually, start with point 1 below .
1. Put the headset in pairing mode:
• Turn the headset on.
• Press and hold the answer / end button until the LED on the
back shines continuously .
What this means
no device in deskstand
Device in deskstand
0-25% charged
25-50% charged
50-75% charged
75-100% charged
fully charged
JAbrA JX20 PurA
5