How To; Activate Voice Dialing - Jabra JX20 PURA Getting Started

hoW to

Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Reject a call *
• Press the answer/end button when the phone rings to reject an
incoming call . Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
hear a busy signal .
Make a call
• When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset . If your phone does not allow this feature, tap on the
Jabra JX20's PURA answer/end button to transfer the call to the
headset .

Activate voice dialing*

• Tap the answer/end button. For best results, record the in
dialing tag through your headset. Please consult your phone's
user manual for more information about using this feature .
Redial last number *
• Double tap the answer/end button when the headset is on
and not in use .
Adjust sound and volume *
• Press the volume buttons (up or down) to adjust the volume
(see fig.1).
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer
a waiting call:
• Press the answer/end button once to put the active call on hold
and answer the waiting call .
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to reject an incoming call.
* Functions marked with * are dependent on your phone
supporting these features. Check your phone's user manual for
further information .
JAbrA JX20 PurA
7