Table of Contents
Advertisement
8.3
Load the Updated Configuration File
8.3.1 Using the FS-GUI to Load a Configuration File
•
In the main menu of the FS-GUI screen, click "Setup", then "File Transfer" and finally "Update".
•
Browse and select the .csv file, open, then click "Submit".
•
Once download is complete, a message bar will appear confirming that the configuration was updated successfully.
•
Click the System Restart Button to put the new file into operation.
NOTE: It is possible to do multiple downloads to the QuickServer before resetting it.
24
QuickServer FS-QS-3X10-F Start-up Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the QuickServer FS-QS-3 10-F Series and is the answer not in the manual?