Table of Contents
Advertisement
Example for IP Address using HTTP or HTTPS: 192.168.1.10/prov
Example for Hostname using TFTP: voip.bicomsystems.com
Example for IP Address using TFTP: 192.168.1.10
Protocol Type
Choose what server type you intend to use: HTTP, HTTPS and Trivial FTP.
recommendation is to use the HTTP.
Update Mode
Set to Update After Reboot.
Click on Apply button. Confirm with Return link.
Click on Reboot at the top navigation menu.
Click Reboot button and confirm to reboot the phone.
You'll have to wait couple of seconds for the configuration to be updated.
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Configure BLF
This chapter describes how to configure BLF (Busy Lamp Field) for Denwa W-610P.
The following topics are covered:
- Extension Settings
- Phone Settings
NOTE:
Our
NOTE:
Do not power
Advertisement
Table of Contents
