Foppapedretti Iturn duoFIX Assembly Instructions Manual page 51

• ENGLISH •
ADJUSTING THE CAR SEAT
must not be placed in the belt loop of the car seat.
Pull the diagonal belt in order to tighten it and, keeping it pulled, close the belt locking
device, bringing it as close as possible to the vehicle's seat belt buckle (fig. 52).
Shake the car seat to be sure it is firmly fixed in place (fig. 53). Place the child into the
car seat. Adjust the headrest correctly (see par. 4.3), position the harness correctly and
attach the buckle (see par. 4.1), finally tighten the harness (see par. 4.2) (fig. 54).
5.3 Group II/III (15-36 kg, from about 3 to 12 years of age) - installation in the
forward-facing position
5 5 5 6 5 7
Remove the harness for use in Group II/III (see par. 4.8).
Rotate the seat into the forward-facing position (see par. 4.5). Place the seat so
that it is in the forward-facing position (fig. 55 and 56).
Attach the ISOFIX connectors (see par. 4.6) (fig. 57).
If the car seat is not equipped with the ISOFIX anchoring system, you can use
only the 3-point seat belt for the installation.
51