Foppapedretti Iturn duoFIX Assembly Instructions Manual page 48

For the safety of the child, check before every journey that:
• Both ISOFIX connectors are hooked into the appropriate anchoring points, and both
indicators are green;
• The car seat is firmly installed on the car;
• The Top Tether belt is correctly tightened and adheres perfectly to the backrest of the
passenger seat, the indicator turns green when it is correctly tightened.
• The harness of the car seat adheres to the body of the child without squeezing them,
between the straps and the upper part of the shoulders there must be a one-finger
space (1 cm);
• The straps are positioned at the right height and are not twisted;
• The chest protectors are at the same height as the child's shoulders;
• The tips of the central buckle are attached correctly
5.1.2 Installation with 3-point seat belt
Release the buckle and remove the reducer (fig. 41).
Slide the lap belt of the vehicle through the loops placed on the car seat, and hook
the tip into the buckle of the car's seat belt (fig. 42). You will hear a "click" once it has
attached. Put the reducer back on the car seat.
• ENGLISH •
ADJUSTING THE CAR SEAT
4 1
4 3
4 5
48
4 2
4 6
4 4