Getting Started; Charge Your Headset; Turn On Your Headset; Pair It With Your Phone - Jabra BT160 User Manual

Getting started

The Jabra BT160 is easy to operate. The answer/end button on the headset
performs different functions depending on how long you press it.
Instruction: Duration of press:
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds
1

Charge your headset

Make sure that your Jabra BT160 headset is fully charged for two hours
before you start using it. Use the AC adapter to charge from a power socket.
Connect your headset as shown in fig. 3. When the LED is solid blue, your
headset is charging. When the solid blue LED turns off, it is fully charged.
2

Turn on your headset

•
Press the answer/end button to turn on your headset
•
Press and hold the answer/end button to turn off your headset
3

Pair it with your phone

Before you use your Jabra BT160, you need to pair it with your mobile phone.
2
1. Put the headset in pairing
Make sure that the headset is on.
Press the answer/end button and press the volume up ( + ) button at
the same time, until a solid blue light comes on.
2. Set your Bluetooth phone to 'discover' the Jabra BT160
Follow your phone's instruction guide. This usually involves going to a
'setup, ' 'connect' or 'Bluetooth' menu on your phone and selecting the
option to 'discover' or 'add' a Bluetooth device.* (See example from a
typical mobile phone in fig. 4)
3. Your phone will find the Jabra BT160
Your phone then asks if you want to pair with it. Accept by pressing 'Yes'
or 'OK' on the phone and confirm with the passkey or PIN
(4 zeros).
Your phone will confirm when pairing is complete. In case of
unsuccessful pairing, repeat steps 1 to 3.
4
mode
3
= 0000

Wear it how you like it

The Jabra BT160 is ready to wear on your right ear. If you prefer the left,
gently flip and rotate the earhook 180°. (See fig. 2)
For optimal performance, wear the Jabra BT160 and your mobile phone
on the same side of your body or within line of sight. In general, you will
get better performance when there are no obstructions between your
headset and your mobile phone. (See fig. 5)
5

How to...

Answer a call
•
Tap the answer/end button on your headset to answer a call
End a call
•
Tap the answer/end button to end an active call
Reject a call (Dependent on your phone supporting this feature)
•
Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person who
called you will either be forwarded to your voice mail or hear a busy
signal
Make a call
•
When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset
Activate voice dialing (Dependent on your phone supporting this
feature)
•
Tap the answer/end button. For best results, record the voice-dialing
tag through your headset. Please consult your phone's user manual for
more information about using this feature
Redial last number (Dependent on your phone supporting this feature)
•
Press the answer/end button
Adjust sound and volume
•
Press the volume up or down ( + or – ) to adjust the volume (See fig. 1)
5