Korg wavestate native User Manual page 47

Setup page
Max # of Notes
[Dynamic, 1...64]
Max # of Notes is available when Voice Assign Mode is set to Poly.
Dynamic is the default. With this setting, you can play as many notes as the system allows.
1-64 limits the number of notes played by the Program. Voices will be allocated dynamically up to this maximum. You
can use this to:
• Model the voice-leading of vintage synthesizers
• Control the resources required by individual Programs
This setting does not limit the Unison Voices parameter. For instance, if Max # of Notes is set to 6, and Unison Voices
is set to 3, you can play up to 6 notes, each with 3 Unison voices.
Mode = Mono
Mono Legato
[Off, On]
Mono Legato is available when Voice Assign Mode is set to Mono.
Legato means to play in a smooth, connected way; the next note is played before the last note is released.
On: The first note in a legato phrase will sound normally; subsequent notes in the phrase will sound smoother (for
instance, envelopes will continue instead of restarting).
Off: Legato playing will produce the same sound as detached playing.
Priority
[Low, High, Last]
Priority is available when Voice Assign Mode is set to Mono.
This determines what happens when more than one note is being held down.
Low: The lowest note will sound. Many vintage monophonic analog synths work this way.
High: The highest note will sound.
Last: The most recently played note will sound.
Unison
Unison Voices
[1...16]
Unison can be used in both Mono and Poly modes.
1: Unison is off, and Stereo Spread and Detune do not apply.
2-16: The Program uses the specified number of more stacked, detuned voices to create a thicker sound.
Detune
[0...200 cents]
This parameter sets the tuning spread for the Unison voices.
Voices = 3, Detune = 24, Thickness Off
Voices
1
2
3
Voices = 4, Detune = 24, Thickness Off
Voices
1
2
Detune
–12
0
+12
Detune
–12
–4
43