Timing - Korg wavestate native User Manual

Wave Sequencing 2.0
x (Multiply Base Note by...)
[1...32]
This appears only if Tempo is On. It multiplies the length of the Base Note. For instance, if the Base Note is set to a
whole note, and Times is set to 3, the Master Lane will reset every three whole notes.

Timing

This Lane controls the duration and crossfade of each Step, creating rhythms or smooth, evolving sounds.
Timing Lane
Preset, Start, End, Loop Start, Loop End, Repeats
See "Standard Lane Controls" on page 30.
TEMPO
[Off, On]
Durations can use either time (Tempo Off) or rhythmic values (Tempo On).
Speed
[TEMPO Off: 0.01...100.00]
[TEMPO On: 1/4...4x]
This modifies the speed of the entire Timing Lane. When Tempo is Off, you can vary this continually from 0.01 (1/100
of the original speed) to 100.00 (100 times the original speed). Try modulating this from the 8: Speed Mod Knob, or
from an envelope!
When TEMPO is On, you can select tempo-locked ratios from 1/4 to 4x of the original Speed.
Xfade
[Time, Tempo, Off]
This determines how all of the Step Xfade parameters will work.
Time: Crossfades times are set in seconds.
Tempo: Crossfades times are set in rhythmic values.
Off: All transitions will be abrupt, and none of the Xfade-related parameters will apply.
Swing (Resolution)
[32nd-note triplet...quarter-note]
(Swing Amount)
[-300...+300%]
Swing adjusts the timing of up-beats relative to the Swing Resolution. For instance, if Resolution is set to 1/8, Swing
affects every other 8th note.
+100%: Full "swing. " Up-beats become triplets, moving one third of the way toward the next down-beat.
+300%: Up-beats move all the way to the next down-beat.
32