Using The Cassette Deck (Listening To A Tape); One Touch Play; Regular Play; Reverse Mode - JVC RV-DP200BK Instructions Manual

Using the Cassette Deck
(Listening to a Tape)
TIMER (AC)
CLOCK TIMER ON/OFF POWER
SLEEP
DOWN UP SET
PROGRAM
RANDOM
AUTO
PRESET REPEAT
TUNER
AUX CD TAPE
BAND
4
FM MODE
REVERSE MODE REW FF
MULTI CONTROL
REVERSE
MODE
DISPLAY
MID /
TREBLE
SUPER WOOFER
VOLUME
VOLUME
RM-SRVDP100
REMOTE CONTROL
The Cassette Deck allows you to play and record audio tapes.
With Automatic Tape Detection, you can listen to type I, II or
IV tapes without having to change any settings.
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes eas-
ily jam in the pinch-rollers and the capstans.
One Touch Play ——————————
This operation is effective only when the System is operated on AC
power.
By pressing the TAPE 2 3 button on the Unit or the Remote Con-
trol, the System will come on, "TAPE" appears on the display, and
if a tape is in the deck, it will start to play. If no tape is loaded, insert
a tape, or select other function.

Regular Play

When the power is already on, you can use this basic procedure:
1. Turn the cassette holder knob counter-
clockwise to open the cassette holder.
2. Put the cassette in, with the side you want
to listen facing toward you.
3. Close the holder gently until it clicks.
4. Press the TAPE 2 3 button.
The tape is played in the direction shown by the Tape Direction
indicator. The Tape Direction indicator
verse) blinks slowly.
3
(Forward playback):
The side of the tape facing you is played back.
2
(Reverse playback):
The opposite side of the tape is played back.
5. If you need to change the playback direc-
tion, press the TAPE 2 3 button.
The opposite side Tape Direction indicator lights up and the
tape playback direction changes.
13
2 3
TAPE
7
¢
SUPER WOOFER
VOLUME
STANDBY
2 3 POWER
TAPE
Knob
3 2
(Forward) or (Re-
Reverse mode indicator
7
4 ¢
VOLUME
MID / TREBLE
PRESET ONE TOUCH MID / BAND
TUNING REC TREBLE MULTI CONTROL
C D TAPE TUNER AUX
REW STOP FF
OPEN
To stop playing, press the
To remove the tape, stop the tape, and open the cassette
holder by turning the cassette holder knob counterclockwise.
To Fast-Wind A Tape ————————
¢ 4
Press the or
3 2
tion indicator or
• The Cassette Deck automatically stops when the tape reaches its
end.
The following table shows the relationship between the Tape
Direction indicator and the actual tape travelling direction in
each mode. The tape travelling direction is indicated by the
blinking indicator.
[Tape Direction indicator and tape travelling direction in each mode]
Stop
3
Forward
2
Reverse
*Blinking indicator shows the tape travelling direction.

Reverse Mode

You can set a tape to play just one side, both sides in succession, or
both sides continuously.
Press the REVERSE MODE button on the Re-
mote Control.
The Reverse mode indicator changes with each press of the button as
shown.
O O O O
= =
O O O O
: The Cassette Deck automatically stops after playing
one side of the tape.
: The Cassette Deck automatically stops after playing
both sides of the tape. (Stops when playback in the
2
reverse (
: The Cassette Deck continues to play both sides of the
tape until the e button is pressed.
Reverse
Forward
button.
button to fast-wind the tape. The Tape Direc-
will rapidly blink on the display.
¢ FF
Playback
(Slow) (Rapid)
(Slow) (Rapid)
=
(back to the beginning)
) direction is finished.)
Tape Direc-
tion indicator
4 REW
3
(Rapid)
2
(Rapid)
13