Using The Microphone/Guitar - JVC RV-DP200BK Instructions Manual

Using the Microphone/Guitar

MIC jack (Use a 6.3 mm diameter plug)
GUITAR Jack (Use a 6.3 mm diameter plug)
Microphone Mixing
Using a microphone (not supplied), you can mix the microphone
sound with a source sound.
1. Set the MIC LEVEL control to MIN by turn-
ing it fully counterclockwise.
2. Open the rubber cap and connect a micro-
phone into the MIC jack on the Unit.
3. Start a source: CD, tape, tuner, Rhythm
Machine, or other equipment.
4. Adjust the main volume and the MIC LEVEL
control, as you sing into the microphone.
To Record Microphone Mixing
on a Tape
1. Follow the above steps 1-4.
2. To record, follow the steps in "Standard
Recording". (See page 14.)
Note: If "howling" occurs, keep the microphone away from the
Unit.
Guitar Mixing
Using a guitar, you can mix the guitar sound with a source sound.
1. Set the GUITAR LEVEL control to MIN by
turning it fully counterclockwise.
2. Open the rubber cap and connect a guitar
into the GUITAR jack on the Unit.
3. Start a source: CD, tape, tuner, Rhythm
Machine, or other equipment.
4. Adjust the main volume and the GUITAR
LEVEL control, as you play the guitar.
CAUTION: DO NOT connect a bass guitar to the
GUITAR jack, as it may damage the System.
22
MIXING
PALETTE
MIC GUITAR
MIN MAX MIN MAX
PAD
MODE
DRUM
PAD
PALETTE
MIC LEVEL
GUITAR LEVEL
To Record Guitar Mixing on a
Tape
1. Follow the above steps 1-4.
2. To record, follow the steps in "Standard
Recording". (See page 14.)
22